Help! Problems with motherboard.

Jagaaaa

n00b
Joined
Feb 14, 2005
Messages
6
Here's the thing: I was shifting around the IDE cables and I accidentally unplugged the cables connecting my front usb and the motherboard. I tried to hook them up again and all of a sudden, the computer turned on on its own, but I don't get a signal on the monitor.

I quickly turned it back off and reconnected everything properly. But even after that, I still don't get any kind of signal.

My box usually beeps once when it's turned on. After this, it doesn't beep at all.

I tried testing the dimms but that didn't seem to be the problem. I tried removing the MB battery and resetting the CMOS, but that didn't help either.

Is this what happens when the computer is off but the power plug is still in? Is my computer dead?

My specs are:

P4 3.0E
Asus P5GD1
Corsair TWINX1024-3200C2PT
Asus X700 Pro
Audigy 2ZS
WD 120 gig hdd

Thanks in advance for any help.
 
Try disconnecting the front USB again to see if it is perhaps still wrong somehow. (reversed + and - Pins can do this)

==>Lazn
 
Sounds bad. Now try the standard stuff.. Disconnect - remove things till you get a responce, reseat video card and RAM, reset CMOS.. etc.

Just to get a POST screen you don't need even a HD plugged in, just CPU, Video card, and one stick of RAM... if that works, start building it back up from there.

If not, it sounds like you fried your MB..

==>Lazn
 
Yeah, none of those suggestions worked.

Damn, I was afraid of that....

Looks like the MB is dead.
 
Back
Top