• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Help please!!

D

Dynafrom

Gawd
Joined
May 28, 2006
Messages
628
I have a only 2 pins for Power LED, but my case has a 3 pin connector, so I have to move one pin over, I tried using tweezers but can't get the wire out. Any help? :confused:

20040315-01.jpg
 
on the back of the connector there is a little latch you can lift with a needle to unlock the connector from the casing. Then just move the wire to the location you want and it will snap back in.
 
Turn the power connector over so your looking at the side with no writing on it. You will see some grooves in the connector, and in those grooves there are little "latches" that need to be pried up with a needle or pick, and once that is done you can carefully pull the wire out of the connector.
 
You must log in or register to reply here.
Back
Top