Help please with ssd and raid.....

L

lakerstowin

n00b
Joined
Dec 22, 2008
Messages
22
I have 2 32gb patriot warp ssd's I use acronis true image all editions.I also have a silicon image 3132 2 port sata 2 add on raid card pci-e.I have spent like 3 hours trying to figure out why any version on acronis will not see the intel raid setup.I have set it up correctly in the bios and everything but acronis will only see the individual drives.Acronis see's it combined with the add on card.I even went as far as to enable all the drive controllers on the board,jmicron,intel and the silicon 3132.Acronis never sees the raid unless it is on the add on card even when the others are all setup correctly.

Any help will be greatly appreciated.
 
Neither of those are actual RAID controllers, they're both fakeraid. If it actually works for the SiI3132 then the Acronis Boot Disk (this app is a bootable CD, right?) must have the drivers for it.
 
I figured it out by accident.I made the raid with the si controller and then just closed it down and put the raided drives on the intel one and started and it went fine into windows,wow.Didnt know you can do that but it worked,lol.
 
You must log in or register to reply here.
Back
Top