I have been having a number of problems with my new build. Im new to all this, so plase excuse my lack of knowledge. And this ridiculously long message...
My system has been crashing alot- within programs. Often, I can force my way out of the crash, but sometimes I need to press reset. For example, whilst running Sandra burn-in, I statred getting constant beeps from case speaker. I learnt that this happens with my MoBo when running Sandra (8KNXP). If I try and stop the test, and quit, my computer doesnt want to, and I have to press reset. This happened this morning, but the reset button wouldnt work- had to switch off at power.
Another strange thing is when using DVD decrypter to burn an image (to back up my DVDs, of course), the computer will stop, and I will have to turn off power. When this fist happened, upon restart, I couldnt get back into Windows. It would get past the windows startup screen, but just go black. It finally worked when I removed the half burnt DVD from the drive.
I finally got the DVD to burn, but once finished, when I went to eject DVD, the screen went black, and took a while to refresh (not sure if this is right term). This refreshing problem has been happening alot- for eg, when I open a new window, all the icons on scrren will disappear, the return one by one (relatively quickly).
Please offer any suggestions as to what may be causing this, guys. I am running the following;
8knxp - bios FB
512 generic ram
p4 2.8C
Audigy 2
Thermaltake 480w butterfly PSU
GeForce 4 MX 440
All standard bios settings, no overclocks.
I have just whacked all this in a new case (PC71-Lian-Li) with a Vantec aeroflow, and probs have sorta just started. Could the DVD problem be caused by using cheap DVDs, and just getting a high fail rate?
note; ran prime 95 for 9 hours last nigth, no errors. Memtest86 for 2 1/2, nothing. Running Sandra right now (with constant beeping!)
Thanks in advance, even just for reading ! Adam.
My system has been crashing alot- within programs. Often, I can force my way out of the crash, but sometimes I need to press reset. For example, whilst running Sandra burn-in, I statred getting constant beeps from case speaker. I learnt that this happens with my MoBo when running Sandra (8KNXP). If I try and stop the test, and quit, my computer doesnt want to, and I have to press reset. This happened this morning, but the reset button wouldnt work- had to switch off at power.
Another strange thing is when using DVD decrypter to burn an image (to back up my DVDs, of course), the computer will stop, and I will have to turn off power. When this fist happened, upon restart, I couldnt get back into Windows. It would get past the windows startup screen, but just go black. It finally worked when I removed the half burnt DVD from the drive.
I finally got the DVD to burn, but once finished, when I went to eject DVD, the screen went black, and took a while to refresh (not sure if this is right term). This refreshing problem has been happening alot- for eg, when I open a new window, all the icons on scrren will disappear, the return one by one (relatively quickly).
Please offer any suggestions as to what may be causing this, guys. I am running the following;
8knxp - bios FB
512 generic ram
p4 2.8C
Audigy 2
Thermaltake 480w butterfly PSU
GeForce 4 MX 440
All standard bios settings, no overclocks.
I have just whacked all this in a new case (PC71-Lian-Li) with a Vantec aeroflow, and probs have sorta just started. Could the DVD problem be caused by using cheap DVDs, and just getting a high fail rate?
note; ran prime 95 for 9 hours last nigth, no errors. Memtest86 for 2 1/2, nothing. Running Sandra right now (with constant beeping!)
Thanks in advance, even just for reading ! Adam.