help overclocking 9800 pro (dosen't overclock very well)

hooah

Limp Gawd
Joined
Jun 12, 2003
Messages
142
i got my 9800 pro 128mb today and just finished a fresh install of windows xp. i started atiotool right after installing dirextx9 and the latest ati drivers.

core tops out at 388 (380 stock) and mem at 370 (340 stock)

any idea what gives, this is really low
 
The core may not be making good contact with the heatsink. Might want to try reseating it if you're feeling adventurous.
 
case cooling is very good. 2 front fans, 2 rear, 1 side and 1 top. cpu has a zalman 7000cu.

i just ran 3dmark03 and it was very choppy in some parts and only 1-3 fps in the troll layer. my 9500 softmodded to 9700 and then overclocked was way smoother and was right on the 9800's scores. something isn't right with this.

score in 3dmark03 was 5617.

softmodded 9500 to 9700np and overclocked to 344/300 (600) was 5493.
 
First of all, are you sure the fan is spinning?

Secondly, if you get a bunch of artifacts immediately after starting the "Find Max Core" test, stop it and start again. I get this sometimes. Bug maybe, I don't know.

I recall that out of the two I've dealt with, one would only hit around 405 artifact free with the stock cooler.

The stock coolers on these things can be pretty lame depending on how tight the springs are. The first one I got literally wobbled on the surface of the core with almost no effort. The second one was a bit better but not by much.

All this being said, if you can't even hit 400 with the stock cooler, an aftermarket cooler probably won't help much. You may just have a dud.
 
Your memory overclock isn't too bad, I get to 374 on my 9800p before artifacting. Your core o/c is pretty dismal as i'm sure you know. Did you try removing the heatsink and reapplying thermal paste? I get 423 on my core before problems start.

-Ace-
 
my memory tops out at 360:(

core should be higher though.

The main reason a graphics card doesn't overclock well is COOLING. I plan on adding some RAM sinks soon to help me in that department. I suggest you check your heatsink, maybe upgrade that.
 
the fan is working on the card and the heatsink is not even hot, warm at best to the touch. i was typing this a minute ago when the screen just went black all of a sudden. restarted computer and running ati tool again, its at 387 and declining with mem at 337.50 (stock) while it finds my max core overclock.

i don't want to modify the card cause i don't even know if this thing is gonna last or give me more black screens. just got it, so its covered under ati warranty and ati is not far away (i'm in toronto, canada). if it keeps giving black screens or can't even be stable at 380 (stock) then its goin back.

any idea's what would cause these problems? its definately not cooling at stock or neat stock clock speeds. i had a 9500 softmodded to 9700 and overclocked to 344/300 with no problems at all.

thanks for the help

EDIT:
forgot to mention, this is with my system set back at default speeds (2.4ghz)
 
You're getting black screens at stock speeds? Are you sure the molex connector is plugged into the power supply properly?

If it gives you black screens at stock speeds just send it back.
 
the black screens it turns out, are "windows has blah blah blah reset your vpu as it stopped responding" or something along those lines.

yup, the power supply is plugged in tight.

i'm gonna let the system scan for artifacts at stock speeds overnight. stock should have no artifacts even after 12 hours right?

i emailed ati for an rma number as well. i still think something really isn't right with this card because the 9500 i had before was smoother and was the same scores as this 9800 give or take 200 points in 3dmark03.

arg, it took 3 weeks for the card to arrive and here goes another 2 weeks while ati "repairs" the card.

just ran 3dmark03 and card scored 4734 with system at 3.28ghz (273fsb) and 4563 with system at 2.4ghz (stock)

seems pretty low to me for a 2.4c system with good memory and a 9800 pro. i expected around low to mid 5000's.

http://service.futuremark.com/compare?2k3=2317104
 
card is goin back to ati today. i ran atitool overnight and max stable core speed was.....379.5 (Stock is supposed to be 380). also paying need for speed underground it ran slow, and i mean slow with any aa or af on. so we'll see how the next card does, stock without random black screens and artifacts would be nice. :(
 
just an update. finally got card working right and got overclock to 440/370 with VGA silencer ATITOOL stable. I'm pretty happy with that, especially since the first card was crap.
 
A tip for some of you guys:

If your 128mb 9800s aren't clocking high on the core, then you most probably have an R360 core.. This came from an ATI tech that I talked to.. Supposedly R350 cores have been very short on supply so they have been using R360 cores instead..
 
i have an R350 core and still can get only like 415 out of it.. memory doens't OC for anything... BUT... even at stock speeds my memory chips will almost burn ur fingers when you touch em... i think i just need some ramsinks
 
Wouldnt that be a good thing though? I thought I heard that the R360 cores were the ones you could throw an XT BIOS on?
 
It definately was your cooling. Remember if a heatsink is not hot to the touch it is NOT working. They are meant to become very hot and that's because they're transferring all that heat away from the card. Sounds like a nice overclock now. I get 408/700 on my 9800se with a stock cooler so I'm pretty happy. :p
 
Originally posted by EnFoRcEr!!
Wouldnt that be a good thing though? I thought I heard that the R360 cores were the ones you could throw an XT BIOS on?

I don't recomend putting XT BIOS on them.. While they increase points in benches, it can give MASSIVE errors later down the line.. This is why I never flashed my card.. I don't know why everyone seems to want to..
 
Back
Top