• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Help needed sn41g(v2 i THINK)

Nasty_Savage

Nasty_Savage

Extremely [H]
Joined
Mar 19, 2001
Messages
37,561
okay. the revision on the motherboard is version 2.0, that's a v2 right? My problem is, I flashed the Bios to the latest revision to get the 400 FSB, but the issue is it will not recognize my Barton +3200. It reports as an +1100 no matter what I try. Any suggestions? :(
 
Apparently v 3.1 on the motherboard is the v2. Luckily, I was able to flash the Bios to the right revision. I clocked up the memory to 200 (400 DDR) and it correctly recognized my Barton +3200. I am running Prim95 now to make sure its stable. Any cooling tips? :D :cool: :D
 
Thought I heard Steve mention something about blowing in instead of out. At this point it appears as if I can use this baby as a hair dryer. :D
 
Blowing in on this system is generally worse than out. I tried both on mine. MIght have had something to do with my 9800 Pro, but I doubt it. It was about 8C cooler blowing out on the case, and 4C cooler on the CPU.
 
You must log in or register to reply here.
Back
Top