• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Help me tweak my voltages

N

Nirad9er

2[H]4U
Joined
Feb 18, 2004
Messages
3,035
Running an eVGA X58 Classified E760. I'm trying to address the temps. I'm not sure if my voltages are too high or maybe my radiator fans need to be upgraded. I thought my temps should be better with watercooling.

If you have any suggestions on my setup, please let me know, otherwise what can I change in my bios?

Thanks

Setup
See signature

Water cooling
EK full coverage motherboard block
EK HF supreme cpu block
Black Ice GTX 480 radiator (4 x 120x25mm ~80cfm)
Swiftech MCP-655 pump
Swiftech MicroRes v2

Temps
Prime95: 82degC
Idle: 47degC

Bios Settings
Frequency Control CPU Clock Ratio ( 20X )
CPU Host Frequency (Mhz) ( 210 )
MCH Strap ( Auto )
CPU Uncore Frequency (Mhz) ( 4006 )
CPU Clock Skew ( 0 ps )
Spread Spectrum ( Disabled )
PCIE Frequency (Mhz) ( 100 )

Memory Feature Memory Speed ( Standard )
Memory Control Setting ( Enabled )
Memory Frequency ( 1333Mhz / 2:10 )
Channel Interleave Setting ( 6 Way )
Rank Interleave Setting ( 4 Way )
Memory Low Gap ( Auto )
tCL Setting ( 9 )
tRCD Setting ( 9 )
tRP Setting ( 9 )
tRAS Setting ( 24 )
tRFC Setting ( Auto )
Command Rate ( Auto )

Voltage Control EVGA VDroop Control ( Without VDroop )
CPU VCore ( 1.40625v )
CPU VTT Voltage ( +400mv )
CPU PLL VCore ( Auto ) 1.8
IOH PLL VCore ( Auto ) 1.8
QPI PLL VCore ( 1.2v )
DIMM Voltage ( 1.65v )
IOH VCore ( 1.250v )
IOH/ICH I/O Voltage ( 1.650v )
ICH VCore ( 1.250v )
NF200 Voltage ( Auto )
VTT PWM Frequency ( 250 KHZ )
CPU PWM Frequency ( 800 KHZ )
CPU Impedance ( Less )
QPI Signal Compensation ( Less )

CPU Feature Intel SpeedStep ( Disabled )
Turbo Mode Function ( Disabled )
CxE Function ( Disabled )
Execute Disable Bit ( Disabled )
Virtualization Technology ( Disabled )
Intel HT Technology ( Enabled )
Active Processor Cores ( All )
QPI Control Settings ( Enabled )
QPI Link Fast Mode ( Enabled )
QPI Frequency Selection ( Auto )
 
cpu voltage may be a tad bit high, but i'm not sure how much lower you can get it.. i would just try lowering one step at a time.. try 1.39v see what happens and just keep going until its unstable and go back up til its stable again..
 
You must log in or register to reply here.
Back
Top