• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Help: I need suggestions.

P

PawNtheSandman

[H]ard|Gawd
Joined
Mar 13, 2003
Messages
1,410
I had my old Chenbro net cube case seen here:

04.jpg

05.jpg

08.jpg


Well I decided to get rid of the BG Micro 20x2 VFD. That left me with an unsightly hole in my case. I took out the tinted window and made the window bigger so now there is only 1 decent sized hole on the side. I used C car molding around the edge and glued plexi to the inside. Fine.

What I need suggestions with is the front of the case is vented. On the bottom all the way under the power switch, is an area for a 120mm fan which I have inside the case. Should I cut a hole in the front of the case and put in a tunnel so I am getting direct unrestricted airflow?

I was thinking about doing this, as the people who did it on the Yeong Yang cube case made it look nice and clean, but on my cube, the front of the case is vented so I am thinking it would look ugly. What do you think?
 
You must log in or register to reply here.
Back
Top