Help! Gigabyte X58A-UD3R overclock attempt --> serious problem.

RaiseR RoofeR

Limp Gawd
Joined
Jan 13, 2007
Messages
164
Hey folks, I have no idea what I did here, but it's not good.

I decided to give my i7 930 CPU a jump to ~3.6Ghz as a starting point to see what it would do (multiplier at 21x, HT on, TB off), with the CPU voltage at ~1.27V on my Gigabyte X58A-UD3R motherboard. Essentially I was ballparking the thread on here as a starter.

When I told the BIOS to save and exit, the computer temp shuts off, turns itself back on, the fans going, running, and in 3 seconds it shuts itself off again. It keeps cycling like this with nothing appearing on the screen. I think I might have seriously screwed something up here. Is there a way to come out of it? I didn't think I made any seriously wrong adjustments...
 
Hah, thanks. It was a quick fix to that immediate situation.

I'm unhappy that my processor is not liking me throwing a moderate overclock at it, considering people seem to be hiting 4Ghz with relative ease.

Thanks.
 
Did you buy that processor used?
Because there is no such thing as an i7 930 that can't do 3.6 ghz, unless you bought one used from ebay, from someone who shoved 2v into it, but won't admit it. Heck I think the 3.6 that's not far from the built in turbo mode.

Make sure that you're flashed to a recent BIOS. Then try changing one setting at a time instead of everything at once, then you can try to narrow down the problem.
 
Back
Top