Heat Spreader quality on Conroe

Well to say the least after lapping my E6600 and my Ultra-120 I was amazed at the difference.

(sorry for the bad cropping and all)

But anways....

Before:

IDLE temp.

Idletemp2.jpg


Load temp.

Loadtemp2.jpg


After:

IDLE temp.

IdleLappedTemp2a.jpg


LOAD temp

LoadLappedtemp2.jpg


now 16 degrees idle and 23 degrees on load seems to be quite a difference!
 
nice! I think there's a newer version of coretemp out you can get. IT looks like that one isn't reading your vid properly. Also, if you get the new beta of speedfan (requires registration), it'll have coretemps right in there


edit: I lapped an e6400 retail I had and it made a nice drop in temps. Now I have an es model (my first) and am hessitant to lap again since temps are already as good as the old lapped one, paste looks decently applied, and most importantly, I don't want to get rid of "intel confidential". Maybe I'll check it with a razor sometime to see how flat it is.. I'm so close to hitting 3.6 on this guy.. ehh
 
Ziddey: What kind of temps do you have w/ that?

I have to give this E6400 1.475V for 3.6Ghz, 24h orthos. W/ room temp of 24C, it's idling @ 48C under the Tuniq+Scythe SFLEX E 1200RPM. Probably load out around 65C this time of year.
 
Ziddey: What kind of temps do you have w/ that?

I have to give this E6400 1.475V for 3.6Ghz, 24h orthos. W/ room temp of 24C, it's idling @ 48C under the Tuniq+Scythe SFLEX E 1200RPM. Probably load out around 65C this time of year.

Well I haven't been able to get it fully stable at 3.6. It'll pass your orthos for as long as you want (well, 27 hours I guess), but when you get to use it, you'll quickly see it falls apart. I don't remember temps exactly, but it was around low 40's idle and low-mid 50's load iirc.
 
+1 on lapping=good. Lapped my 6600 and Tuniq for a 5-6C lowering running Orthos at stock volts at 3.4ghz, upping voltage to 1.3875 to get 3.6ghz Orthos stable resulted in a 10C drop in temps. IHS was raised on corners and edges...Tuniq was dished also.
 
Back
Top