HD7950 X-Fire Heaven Score

Okay I just tested with 3d Mark Pro 11 on extreme settings and my results were:

http://www.flickr.com/photos/77937160@N04/7634904800/in/photostream

Also here are my system specs, should have posted in the first post.

i5 2500k @ 4.5Ghz / 1.25v
16 GB G.Skill Ripjaws 1600
Gigabyte Windforce HD7950 OCed to 1150Mhz/1450Mhz @ 1.237v (x2)
Crucial M4 128GB

What are you guys scoring on these benches with HD79xx X-fire? Also what about you Nvidia guys with the 670/680 SLI? Would really love to see your guys' OCs and scores. Thanks!
 
This is awesome. Thanks for those benches. I have considered doing x4 7950s recently
 
I actually have a Sapphire HD7950 OC edition so I could do 3x, but my motherboard will only support 2 video cards :(. I guess I'll have to sell it or get another motherboard.
 
I have a similar setup. I'll bench mine in a little bit. Only running my video cards at 900/1400. Higher than 940 or so seems to give me driver failed/recovered errors. Still stock voltage is probably why.



You are overclocked on the graphics cards about 28% more than me and you get a 21.5% higher score.
 
Last edited:
Here is two benches.... You can use my example as a comparison to see where the ELITE of last generation matches the lower high end of the current generation.

First screenshot is my single 6990 (dual GPU Xfire) @ Stock Clocks 880mhz GPU/1250mhz ram......
stockclock


Second screenshot is same card @ 990mhz GPU/1375mhz ram... Significant increase in performance....
990mhz
 
Last edited:
Okay I just tested with 3d Mark Pro 11 on extreme settings and my results were:

http://www.flickr.com/photos/77937160@N04/7634904800/in/photostream

Also here are my system specs, should have posted in the first post.

i5 2500k @ 4.5Ghz / 1.25v
16 GB G.Skill Ripjaws 1600
Gigabyte Windforce HD7950 OCed to 1150Mhz/1450Mhz @ 1.237v (x2)
Crucial M4 128GB

What are you guys scoring on these benches with HD79xx X-fire? Also what about you Nvidia guys with the 670/680 SLI? Would really love to see your guys' OCs and scores. Thanks!

3Dmark11
Mine running 1100/1400 I got X5700, but usually I run them 1000/1375

Core I need 1.1v to run 1100mhz, 1.081v to 1050mhz and 1.062v to 1000mhz, to go higher I need to change my power supply.
Mem I can run 1450 without problems, 1500 starts artifacting so 1400 would be the max to run safer, for me.
 
Last edited:
Here is two benches.... You can use my example as a comparison to see where the ELITE of last generation matches the lower high end of the current generation.

First screenshot is my single 6990 (dual GPU Xfire) @ Stock Clocks 880mhz GPU/1250mhz ram......

Second screenshot is same card @ 990mhz GPU/1375mhz ram... Significant increase in performance....

If it's to compare with the two above posters, you need to turn on 8xAA.
 
If it's to compare with the two above posters, you need to turn on 8xAA.

oops missed that little detail. I tried to match settings. Im not going to do it again. As you can see even with 8xAA turned off their crossfire 7950s are going to rape the 6990 even more if I turned it on.
 
Back
Top