Having trouble installing O/S and booting from CD

Safarji

Gawd
Joined
Dec 15, 2000
Messages
857
Ok, I have solved the problem.

Scanning PCI Bus Mechanism #2 is caused by this one thing.

PCI Devices, namely Audio devices. In my case because I have no PCI cards so it's the OnBoard Audio (Soundstorm). All I had to do for this past year was disable it in the BIOS. OMFG. How annoying is that.
Surely I am not the only one using OnBoard sound on this board who has tried to boot from a cd rom atleast once in the last year, but it would seem so. Or at least very few as a google search provided.

I've traded up my SB Live! which I bought in 1999 for an even worse substitue in NVidia Soundstorm ObBoard audio.

How do I make this information publicly available to help out other people with the same issues?






- Original Post -
Thanks for replying in advance.

I currently have 4x HDD's. 3x PATA, 1x SATA.

Disk0 has an old copy of Windows XP on it, which I cannot delete format in XP.
Disk1 was an extended partition with no O/S ever installed.
Disk2 has my current installation of XP Pro
Disk3 is a New SATA I have, which has no effect on the other drives.
disk.jpg


If I unplug ANY of my PATA drives I get the following error -

'Cannot start windows because the following file is corruct or missing - <Windows Root>\System32\hall.dll' (Power connected to HDD, but set to ignore in BIOS)
&
'Disk Boot Failure, Insert System Disk And Press Any Key' (No Power to HDD, set to ingore in BIOS)

I will explain why this is a problem.

My XP Pro CD, will not boot from the CD-ROM. Why, I dont know. How do I get this thing to boot (it's all enabled to boot in the BIOS, I know this because my Win98SE CD boots).

My FDD is out of action, so I can't use it.

My only other option was to use my Win98SE cd to load cd-rom device drives then switch over to the XP cd and install it from there, in theory this should work but I get this exact problem when trying to do so -
Scanning PCI Bus Mechanism #2 However the remedie suggested does not work for me as I use no PCI devices. Any suggestions.

These issues go hand in hand, and I really need one to do the other, so as I can get a new install of XP on my system.
 
try copying the xp setup files to some location on one of the hdd's then use the win98 cd to boot into command prompt mode
 
ug_rulz_all said:
try copying the xp setup files to some location on one of the hdd's then use the win98 cd to boot into command prompt mode

I tried that one, however I get this error message when I go to copy the files, even if it's an ISO.

copyerror.jpg
 
Good bump :)
Anyway, I don't see why it shouldn't boot. As long as the CD-ROM is ahead of the PATA and SATA drives in the boot settings in the BIOS, it should work. Is the XP disc faulty at all?
 
4keatimj said:
Good bump :)
Anyway, I don't see why it shouldn't boot. As long as the CD-ROM is ahead of the PATA and SATA drives in the boot settings in the BIOS, it should work. Is the XP disc faulty at all?

God I hope not, the thing costed me $300. :(

I'll never figure this out
 
anyone? or atleast, please direct to somewhere I could get help? this might be a mobo manufacturer problem!
 
You should verify that the XP cd is good. Try it in another machine to see if you can boot from it. It sounds like a bad disk to me.
 
Back
Top