I have two systems based on the GA-P35-DS3L. Mine has a quad core, and my son's has the E6500 cpu. We have Windows 7 x64 Professional on both.
My son's computer is now acting up badly, and I'm concerned about the hardware. The main two symptoms are on the CMOS Setup screen.
(1) if I leave the CPU Host Clock Control on disabled, the CPU Frequency is now incorrect. It shows "700 MHz (100x7)" whereas it used to correctly show "1.87 GHz (266x7)"
(2) the CPU Host Frequency is shown as 100, which is wrong.
and the boot screen shows a FSB of 533, which is correct.
The other major problem is that some Windows files (manifest files, it appears) have been corrupted, preventing me from doing three of the most recent Windows updates.
Now, if I overclock it, which worked great for a while (see below), the speed in Windows doesn't reflect the OC, and Prime95 fails immediately. I don't care whether I can OC it so much as just giving him a stable system.
For background, his computer ran great for a while, then a friend suggested I overclock it. We did (just changed the FSB to 400 and fixed the multiplier to keep the memory at 800), and it ran flawlessly for months.
Then my son decided to do a science project on overclocking for school, so we ran benchmarks and then restored the defaults and ran the benchmarks again, and then re-overclocked it. I think I left the PCI-E speed on "Auto" - can't remember whether I forced it to 100 or Auto.
I set System Voltage Control to manual, but left all the settings in place, at my friend's suggestion, since it had been stable. I've also tried setting it to Auto. I didn't change the DDR2 voltage in the past or now.
I'm concerned that the CPU might be damaged, because of that "100x7" reading in BIOS, and the fact that I cannot overclock at all now. Frankly, I just want to get it running reliably. Yeah, I'd love to OC it again, but my son just wants to be able to play his games.
I tried resetting CMOS (jumpered the CMOS pins, also removed the battery for one minute), no change.
IF I can get the BIOS correct, I figure I'll next do a Repair Installation of Windows 7. Anyone have any other advice?
Thanks!
My son's computer is now acting up badly, and I'm concerned about the hardware. The main two symptoms are on the CMOS Setup screen.
(1) if I leave the CPU Host Clock Control on disabled, the CPU Frequency is now incorrect. It shows "700 MHz (100x7)" whereas it used to correctly show "1.87 GHz (266x7)"
(2) the CPU Host Frequency is shown as 100, which is wrong.
and the boot screen shows a FSB of 533, which is correct.
The other major problem is that some Windows files (manifest files, it appears) have been corrupted, preventing me from doing three of the most recent Windows updates.
Now, if I overclock it, which worked great for a while (see below), the speed in Windows doesn't reflect the OC, and Prime95 fails immediately. I don't care whether I can OC it so much as just giving him a stable system.
For background, his computer ran great for a while, then a friend suggested I overclock it. We did (just changed the FSB to 400 and fixed the multiplier to keep the memory at 800), and it ran flawlessly for months.
Then my son decided to do a science project on overclocking for school, so we ran benchmarks and then restored the defaults and ran the benchmarks again, and then re-overclocked it. I think I left the PCI-E speed on "Auto" - can't remember whether I forced it to 100 or Auto.
I set System Voltage Control to manual, but left all the settings in place, at my friend's suggestion, since it had been stable. I've also tried setting it to Auto. I didn't change the DDR2 voltage in the past or now.
I'm concerned that the CPU might be damaged, because of that "100x7" reading in BIOS, and the fact that I cannot overclock at all now. Frankly, I just want to get it running reliably. Yeah, I'd love to OC it again, but my son just wants to be able to play his games.
I tried resetting CMOS (jumpered the CMOS pins, also removed the battery for one minute), no change.
IF I can get the BIOS correct, I figure I'll next do a Repair Installation of Windows 7. Anyone have any other advice?
Thanks!