Hard Drive Versus Thermite

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
Hack-a-Day has come up with a rather impressive way of destroying the data on your old hard drive….use Thermite! This video is a compellation of smaller videos and still pictures of hard drives being melted, hit the link for the full article and lots of pictures.
 
I love the do not try this at the end of the article. You bet your ass I'm fucking trying it, now that you told me about it, looks cool, err I mean hot.
 
I love the do not try this at the end of the article. You bet your ass I'm fucking trying it, now that you told me about it, looks cool, err I mean hot.

Make a video :D
 
Destruction checklist:

1. Kill will fire XX
2. Cruise Missile
3. Nuke from Orbit

I wouldn't be too sure. Even a Space Shuttle burn up from the atmosphere and crash on the planet didn't stop data from being pulled from it's hard drive.
 
Thermite burns REALLY HOT, as you can see how well it melted the platters through the HDD casing enough to make its own path out and drip like water.
 
Thermite: when you absolutely, positively need to make sure the information contained on a hard drive needs to be destroyed without possibility of recovery.
 
Hrmm I think we found a way to make IT Security a very very fun job.
 
Meh, I learned how to make Thermite as a kid (stuff you can find in any drugstore and garden shack) and I've thought of using it to protect data before, but I still haven't figured out a way that I feel safe using it (something simple to trigger, but that not just any idiot can trigger by accident). Once you see that stuff (feel that stuff go off), you will be very paranoid about how to implement it.
 
There is only one way and that is with

dd


THE GREAT ZERO CHALLENGE
http://16systems.com/zero/index.html

Q. What is this?

A. A challenge to confirm whether or not a professional, established data recovery firm can recover data from a hard drive that has been overwritten with zeros once. We used the 32 year-old Unix dd command using /dev/zero as input to overwrite the drive. Three data recover companies were contacted. All three are listed on this page. Two companies declined to review the drive immediately upon hearing the phrase 'dd', the third declined to review the drive after we spoke to second level phone support and they asked if the dd command had actually completed (good question). Here is their response... paraphrased from a phone conversation:

"According to our Unix team, there is less than a zero percent chance of data recovery after that dd command. The drive itself has been overwritten in a very fundamental manner. However, if for legal reasons you need to demonstrate that an effort is being made to recover some or all of the data, go ahead and send it in and we'll certainly make an effort, but again, from what you've told us, our engineers are certain that we cannot recover data from the drive. We'll email you a quote."
 
Meh, I learned how to make Thermite as a kid (stuff you can find in any drugstore and garden shack) and I've thought of using it to protect data before, but I still haven't figured out a way that I feel safe using it (something simple to trigger, but that not just any idiot can trigger by accident). Once you see that stuff (feel that stuff go off), you will be very paranoid about how to implement it.

Based on what I am reading on wikipedia, it isn't that easy to ignite...
 
Thermite, was used to weld Rail road's. If it can weld that stuff. Nothing but a molten puddle will remain out of this weaker metal/s.
 
Based on what I am reading on wikipedia, it isn't that easy to ignite...

I am talking about a triggering mechanism, I would like to flip a switch and my HDDs flame up, but I don't want some idiot going what's this and I have to explain to the landlords why there is a whole in there bedroom ceiling.
 
so what does it do, basically melt through anything? That's cool..

When I was in the military, we used to get fun stuff to play with (since I was infantry). One of the fun things was thermite. It's in a grenade form, similar to a smoke grenade (not frag type). The purpose of it was to destroy sensitive data, destroy weapons caches and disable vehicles.

Thermite will burn right through an engine block. ...don't even try to put it out, you just have to wait until it burns itself out.

...another one of my favorites was the smoke pot. It's a paint can that's around 30lbs of smoke. It'll smoke out an entire block for around 15 minutes. The best part was the directions labelled, "Instructions for Smoke Pot".
 
Keep in mind that most (if not all) HD platters nowadays are made out of glass. A 30lb sledgehammer is an amazingly cathartic way to unleash your frustrations on something that oh, may have died on you just before you were about to prep it for a backup.

Had an IBM Deathstar drive. Compiled about 8 years worth of CDR backups (that I foolishly cut up and threw away in eagerness to burn a DVD) and was getting my system ready to burn the cleaned up, sorted and weeded for dupes directories to DVD. Gave the system a reboot (had been up for a while and system was lagging slightly)... The drive died on post. Motor gave out.

30lb sledgehammer and about 10 minutes straight whacking the hell out of it... yeah. It felt good. Oh, and the pic was posted to the frontpage on HardOCP, too. This was about 5 years ago. I dented the top cover pretty well, took a few well placed hits to strip the heads off the screws holding it down. Peeled the top cover back and the platters inside were completely shattered. Glass, through and through. Generated a fair amount of fine grained dust like glass in the whole process.

http://ergh.org/photos/misc/featuredonhardocp.jpg

That said... I'd still burn a HD with thermite if I had it handy... if just to watch the platters melt and drip like it did in the video.
 
I am talking about a triggering mechanism, I would like to flip a switch and my HDDs flame up, but I don't want some idiot going what's this and I have to explain to the landlords why there is a whole in there bedroom ceiling.

All you need is some type of stepper ignition. the easiest method would be to tape a model rocket igniter to a magnesium strip and plant it deep inside the thermite. Remember that there is no need for the burning part at the center to need oxygen since it creates its own. fille the inside of an old CD drive with the thermite and have the igniter go to a well protected switch (wouldn't want any accidents) and the 12v lead of your psu. If the feds ever come, all you have to do is hit the switch and GTFO...

It just occurred to me that I'm writing this from a government computer.....
oops
 
Keep in mind that most (if not all) HD platters nowadays are made out of glass. A 30lb sledgehammer is an amazingly cathartic way to unleash your frustrations on something that oh, may have died on you just before you were about to prep it for a backup.

Had an IBM Deathstar drive. Compiled about 8 years worth of CDR backups (that I foolishly cut up and threw away in eagerness to burn a DVD) and was getting my system ready to burn the cleaned up, sorted and weeded for dupes directories to DVD. Gave the system a reboot (had been up for a while and system was lagging slightly)... The drive died on post. Motor gave out.

30lb sledgehammer and about 10 minutes straight whacking the hell out of it... yeah. It felt good. Oh, and the pic was posted to the frontpage on HardOCP, too. This was about 5 years ago. I dented the top cover pretty well, took a few well placed hits to strip the heads off the screws holding it down. Peeled the top cover back and the platters inside were completely shattered. Glass, through and through. Generated a fair amount of fine grained dust like glass in the whole process.

http://ergh.org/photos/misc/featuredonhardocp.jpg

That said... I'd still burn a HD with thermite if I had it handy... if just to watch the platters melt and drip like it did in the video.

AFAIK, only the DeathStar (not a type, that's what our IT dept love to call for their tendency to die all of a sudden) had glass platters. I was often assigned the task to destroy harddisks with a drill press and Maxtor/Seagate/WD have aluminium platters.

From a data destruction view, the DeathStar is the best indeed since a sledgehammer will take care of the data in a sure way.

 
AFAIK, only the DeathStar (not a type, that's what our IT dept love to call for their tendency to die all of a sudden) had glass platters. I was often assigned the task to destroy harddisks with a drill press and Maxtor/Seagate/WD have aluminium platters.

From a data destruction view, the DeathStar is the best indeed since a sledgehammer will take care of the data in a sure way.


I can confirm that this applies to all Hitachi drives. When Hitachi bought IBMs money drain of a hard drive business they kept the same manufacturing technology and equipment. I took in a laptop for data recovery recently that had a Hitachi travelstar. As I pulled it from the wreckage, I could already hear the rattle of shattered glass. Popped the drive open and sure enough, both platters were in thousands of pieces.
 
so what does it do, basically melt through anything? That's cool..

Guess you never had a chem class in high school or just didnt have a cool chem teacher.

That said this was brought up in another thread a few weeks back. It's cheaper just to burn and hammer down on a hdd then to go through all of this. Not to mention safer. Fuck up with a hammer and you lose a thumb. F up with thermite and you may end up with a hole between your legs...
 
When I was in the military, we used to get fun stuff to play with (since I was infantry). One of the fun things was thermite. It's in a grenade form, similar to a smoke grenade (not frag type). The purpose of it was to destroy sensitive data, destroy weapons caches and disable vehicles.

Thermite will burn right through an engine block. ...don't even try to put it out, you just have to wait until it burns itself out.

...another one of my favorites was the smoke pot. It's a paint can that's around 30lbs of smoke. It'll smoke out an entire block for around 15 minutes. The best part was the directions labelled, "Instructions for Smoke Pot".

Damn ! :cool:
 
Thermite, was used to weld Rail road's. If it can weld that stuff. Nothing but a molten puddle will remain out of this weaker metal/s.

It still is used.
Engineering Track Standards said:
Temporary joints in CWR that cannot be immediately welded will be drilled and splice bars applied to allow for future thermite welding, leaving a joint gap not exceeding 3/8”. All temporary joints should be welded prior to the onset of winter. Any temporary joints that are unable to be welded prior to winter should be fully drilled, bolted and box anchored.

Based on what I am reading on wikipedia, it isn't that easy to ignite...

Actually it's pretty easy to ignite. Remember, wikipedia isn't always accurate.
 
Back
Top