Hard Drive question

rinaldo00

2[H]4U
2FA
Joined
Mar 9, 2005
Messages
2,930
I have a MSI P67A-GD65 mother board with 4 hard drives installed. All 4 work, all 4 appear in the device manager, yet 2 show up as listed on the prebios boot screen but do NOT appear as listed when I enter the bios utilities, and the other 2 are listed in my bios utilities but are NOT listed on the prebios boot screen. Is it because 2 are connected to the 6GB/s ports and 2 are connected to the 3GB/s ports?

Is there a utility that tells me what HD is connected to which port? I tried MSI 6 Series SATA SCAN but it doesn't list the drive model info.


Thanks
 
Last edited:
Why does MSI 6 Series SATA SCAN show I only have 2 6GB/s ports (SATA 3) when I should have 4?
 
The other 2 SATA 3 ports are supplied via a 3rd party controller. The ones you aren't seeing I think are connected to the Intel ports as it posts too fast to see.

Physically speaking you should have 4 white ports and 4 black ports, looking from top to bottom 2W/2B/2B/2W. The white ports are SATA 3. The bottom 2 white SATA 3 ports are supplied by the third party Marvell controller.

Personally I just use the Intel ports and disabled the Marvell ones.
 
Right, I just read about the Marvell ports. I guess I will put my SSD and my fastest HD on the two 6GB/s ports and put the other 2 HDs on the two 3GB/s ports and ignore the Marvell ports.
 
Back
Top