Hello, I have a WD2500JD hooked up to the onboard SATA on a DFI LP UT nForce 4 Ultra-D. I also have 2x 36 gig raptors hooked up in raid 0. I left the 2500 out when I installed Windows SP2 on the raptors and got everything setup. Then I installed the 2500 and tried to use disk manager to format it, however it got to about 45% and just stopped. So i tried a quick format (just to see if it would work) and it did work but the data I put on the drive gets corrupted it would appear. The 2x raptors work great with Windows and all my apps, but I'm not sure what could be wrong with the 2500, maybe a bad disk? Anyone know whats up? Thanks.
![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
-
Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
Hard drive problem in new computer setup.
- Thread starter jmanlp
- Start date
Hit up http://support.wdc.com/download/index.asp
and download a copy of DLGDIAG. Thats WD's diagnosis test. If you get an error code other than 0000 at the end you have a bad drive. Write that number down, as it is required for an RMA
and download a copy of DLGDIAG. Thats WD's diagnosis test. If you get an error code other than 0000 at the end you have a bad drive. Write that number down, as it is required for an RMA