Hard drive in upright position - bad?

jeece

Limp Gawd
Joined
Jan 27, 2004
Messages
316
Hey there all...

I'm building a small home server case from scratch, and I need to have it the smallest possible (height and depth are ATX mobo size, and width is about PSU's width), maybe I'll add half an inch to each dimension.

So, since space is an issue, I want to place the case in upright position. But there's no space for the HD, if I want to put it in it's original position. I'd have to put it upright. I know some IBMs have this kind of setup. But hey, because they do it, doesn't mean it's right...

So, could I have some reliability issues with this kind of setup? Oh, it's a Western Digital Caviar 40Gb if it matters.

;) Thanks!
 
Not really, although perhaps the heads might suffer if moving against gravity. The best way to place is is horizontal, if you can. But if you can't, well it should be right.
 
it might decrease the life of your drive by like 3% but i see no reason not to do it.
 
I've seen dozens of Dell Dimension desktop machines come through the place with hard drives mounted vertically, connector end topmost.

Good enough for #1 pusher of dull-as-dust corporate crates, shouldn't be much trouble for you. Gateway and Emachine micro-ATX boxes mount the drive the same way.
 
Cool, thanks! I hoped I wouldn't have to build an horizontal case just to accomodate my HD.

:D
 
Back
Top