• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Happy Results O/C'ing

F

forcemac101

[H]ard|Gawd
Joined
Feb 28, 2001
Messages
2,031
well I am happy to report i got my new 3.0ghz to 3.54ghz on a Gigabyte 8IK1100, with 1gb of mushkin blue line ram and a Zalman 7000 AL-CU

Ram is running at 392mhz (1.66 adjuster in bios) at 2.5-6-6-6.

The processor is pushed to limits as it sits idel at about 35C (case is 25) and pushes up to 59C at 100% and about 52C under a gaming load (BF1942).

Can't get the memory up to 470 though which would be the 2.0 adjuster in the bios. I might to ratchet it down to CL3, but I think I might stay here for awhile.

I was kinda worried as I couldn't find much on the Gigabyte board....
 
59 celcius man is quite hot... jesus... i would get extra cooling...

Damn did you overclock that sucker good:)

I dunno but i just think thats way too hot....
 
According to the Sticky up top, i seem to be ok. Maybe a little on the warm side, but nowhere close to 72C
 
Your overclocked chip having load temps in the 50's is well below trottle. I won't worry. Nice oc there.
 
Ok heres something fun....now its operating at 3.6GHZ and a lower temp around 47C.....should I go higher...I almost giddy..to try it...

I have one worry, i have fixed the agp/pci/src at 66/33/100 but the gigabyte utility show them running out of spec. I don't take much stock in teh gigabyte utility as if you try to overclock using soley that, and then check your results with wcpuid, it still shows stock speed. I only use it right now for a Temp, but then agian I don't know how off that might be either. But MBM 5 aggreed with the gigabytes temp, so that kinda gives me a warm fuzzy on how its going.



Ram is now back to running at 400MHZ (stillusing the 1.66 ratio, I imagine that is 5:3 but never heard of that timing.)

Hers a screeny.
OC1.jpg


Should i go for 3.8?
 
You must log in or register to reply here.
Back
Top