• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

HAF932 side door depth?

L

Ludovic

Weaksauce
Joined
Dec 8, 2007
Messages
100
Hi All,

I'm looking to mount 2 x 240 rads on the inside door of the HAF932 simular to the one shown half way down this thread http://www.evga.com/forums/tm.aspx?m=200522.

Does anyone know the maximum combined depth of fan and radiatior block I can squeeze inside?

thanks for reading

Ludo
 
It's not the side door depth, rads are fitted over the motherboard area. From that pic it's evident that about 2" worth of space is available, but you might be better off asking in that thread, the poster of that setup. Personally, I just hang one rad on the top and and one outside, behind the case, and top portion has plenty of room for PA120.3 and 6 fans in push-pull
 
Thanks...

I would have asked the original poster, but that thread is nearly 2 years old and that was their only post...

I was hoping to mount two XSPC RX240 Dimensions: 125x58.5x286mm (WxDxH) plus fan on the inside of the door, I'm guessing I might be hitting the top of the video card, if so I might have to choose a thinner radiator.

any further help would be grateful since this will be my first WC build.

Ludo
 
You must log in or register to reply here.
Back
Top