• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

HAF 922 LED problem

B

blingbling

n00b
Joined
Jun 29, 2009
Messages
48
Okay guys so i went ahead and bought the HAF 922.Its an amazing case i havta say.But my problem is that the front LED fan rotates but the LED doesnt turn on...i tried pressing the switch on top but to no avail.It really steals away the look of the case :( any solution?
 
There are 2 sets of cable for the front fan, 1 is for power, the other is a small 2 pin plug that goes to the switch. If the LEDs on the fan don't light up, that plug most likely came lose and just needs to be plugged back in
 
okay so here's the pic of the 2 pin cable which is not connected....where exactly does this go??
kushalrao
 
Couldn't see the pic, link borked...

There are 2, 2 wire leads on behind the front panel, 1 is on the fan and connects to the fan where the power connectors are. The other comes from the top of the case and should be very close to the bundle of wires for the front panel leads (power switch, usb, etc.). The 2 just need to be connected together.

If you plan on leaving the light on all the time, you can bend a staple in half and short the 2 pin lead going to the fan and it will stay lit all the time (cover it with electrical tape just to make sure it doesn't short). I had a coworker buy one also, and he decided to switch the front fan for a Blue LED one. I now have his front red fan on the top of mine and had to short the connector to light mine up
 
You must log in or register to reply here.
Back
Top