H97 upgrade bummer !@#$ :O:O

Manofsteel

Weaksauce
Joined
Oct 29, 2013
Messages
121
I upgraded to Core i5 4440 yesterday along with this board:

GIGABYTE - Motherboard - Socket 1150 - GA-H97M-DS3P (rev. 1.0)

I had this board previously:

GIGABYTE - Motherboard - Socket AM3+ - GA-78LMT-USB3 (rev. 4.1)

This board needed a driver for USB3 ports to work (i am assuming it had an external USB3 controller instead of something on the main chipset) I used to get around 50-90 MBps (have seen 150 MBps spikes!) transfer speeds on USB3 on it and a 9 meter USB3 cable (! yes 9 meter) worked flawlessly on it for Fiio E10:

Amazon.com: FiiO E10 USB DAC Headphone Amplifier: Electronics

to amp this:

Audio-Technica's ATH-M50 | Professional Studio Monitor Headphones || Audio-Technica US

After the upgrade I am no longer able to use that long cable and i get slower speeds on USB3. It looks like it is capped @ 49 MBps. I was expecting better performance as this chipset is new and USB3 is on the "Chipset" instead of an external controller.

Any inputs will help...
 
The number one question would be, what performance do you get with a 1 or 2 meter usb 3 cable that way a baseline can be established.

Running 9 meters on a USB cable is pretty darn impressive, I'm surprised there isn't all sorts of data loss or corruption going on, and probably why it caps out at 49MB/s.
 
Bit correction. 50 MBps was when I transfer from hdd to pen drive. The pen drive has a limitation. When I transfer the same movie back to hdd i get 77/80 MBps so its fine. NO ISSUES WITH USB3 speeds now :)

Problem : The problem is my headphone DAC was connected to the same 9 meters USB3 cable on a USB3 port and never gave me issues on the old motherboard. On the new board (the one in my signature) it can't somehow make the E10 work. The The DAC works fine when i connect it with a short cable. I connected the cable to PCI USB card and now it gets detected by windows but still unusable! I can't test it (windows sound test) I don't use that long cable for data transfers only as an extension for the DAC.
The old motherboard was AMD GA78LMT-USB3 and it had an external USB3 controller - Etron AFAIR.
 
Last edited:
Connected cable to a PCI USB card and its working now. I really wonder how it worked on the old gen 760G mobo and not on this new H97 chipset. All well as of now though.
 
Back
Top