tankman1989
Gawd
- Joined
- Aug 21, 2009
- Messages
- 588
I have always been a little unclear on what the differences are between motherboard architectures so I'd like to check the board before I tale the plunge.
I need this basically as a minimal workstation with focus on video playback and portability - but laptops just don't work in my application. It supports 3 monitors which is a major ++.
ASRock H97M-ITX/ac LGA 1150
The device has this: 1 x Vertical Half Mini-PCI Express Slot: For WiFi + BT Module
-Can this be used for some other card as I don't like wifi or BT on this machine. I have a lot of dual nic's that only take pcie_1x and I'm wondering if I could use some kind of riser where the wifi card would fit.
I do need 2 other Gigabit metwrk connections. I'm thinking of a USB3 hub/nic combo as one option along with another hub/nic or a stand alone USB nic.
I have a lot of dual nic's that only take pcie_1x and I'm wondering if I could use some kind of riser from the wifi/BT slot to put the pci-e x1 card in?
If all else fails I have seen risers that split a x16 slot into something like 4 x4 slots which might be an option.
Anyone have any ideas on how this mini pci-e slot can be used and what CPU would be a good choice for $120 or less?
Also, i have G Skill DDR3-1600 / PC3-12800 4GB sticks of ram. Any reason why this wouldn't work on this?
I need this basically as a minimal workstation with focus on video playback and portability - but laptops just don't work in my application. It supports 3 monitors which is a major ++.
ASRock H97M-ITX/ac LGA 1150
The device has this: 1 x Vertical Half Mini-PCI Express Slot: For WiFi + BT Module
-Can this be used for some other card as I don't like wifi or BT on this machine. I have a lot of dual nic's that only take pcie_1x and I'm wondering if I could use some kind of riser where the wifi card would fit.
I do need 2 other Gigabit metwrk connections. I'm thinking of a USB3 hub/nic combo as one option along with another hub/nic or a stand alone USB nic.
I have a lot of dual nic's that only take pcie_1x and I'm wondering if I could use some kind of riser from the wifi/BT slot to put the pci-e x1 card in?
If all else fails I have seen risers that split a x16 slot into something like 4 x4 slots which might be an option.
Anyone have any ideas on how this mini pci-e slot can be used and what CPU would be a good choice for $120 or less?
Also, i have G Skill DDR3-1600 / PC3-12800 4GB sticks of ram. Any reason why this wouldn't work on this?
Last edited: