[H] Cable Management

The lower rack looks like a big stack of twisted pair telco lines. Not a big deal to be bundled like that. Just dont expect much data through that greater then a Fax. There is no way you could run any reliable data at any modern speed through those lines though.
 
I worked for a subcontractor & covered the US in the '90's, so we dealt with all sorts of crazy "installation standards" (IIRC SouthWestern Bell was the craziest) we installed Siemens EWSD & ISDN switches, Ericsson AXE10 & DSC LightSpan/StarSpan equipment. Ah, Newton rack, for some reason I couldn't recall the name, I only ever saw the gold & gray rack, gold was always hollow & gray was always solid. Everywhere was pretty gung-ho about perfection & all but a few jobs were laced, forget where, but on one job they had us cutting out the factory tie wraps in the equipment & then lacing it. Lacing is an art form & looks so much more professional. If tie wraps were allowed, they were anal about them being cut flush, no sharp edges. The 1 or 2 projects I was on that allowed tie wraps on the cable rack looked like total hell, they just don't hold cable in place like waxed 9 cord...if it had been up to me I'd have cut them all out & started lacing.

We used to do a lot of wire wrapping too, especially on the mainframe, and all the connectors on the ends of Ericsson cables were wire wrapped too (we had an office that made cables for them), that's another dying art form that got me extra work with another company because only 1 other person in that company knew how.

I had a few scary incidents with those pegs, slip & catch yourself to find it's at your throat or eye, I slipped off a ladder while wire wrapping some sort of copper/fiber interface rack I can't remember what it was now (it's amazing how much copper is in a fiber system lol) & wound up hanging on a smaller form of horn by my shiny new wedding ring...which had torn under my skin...real fun day that was.

You're not kidding about the solid rack being shit heavy, much heavier than it looks. Hollow rack was usually only used on top of the equipment, mainly bolted to the top of EWSD equipment , but we rarely saw it anywhere else.

I've been out of the loop a long time, I wonder how much has changed & if installers still take as much pride in their profession, as we did then.
 
That is amazing when you are not use to seeing something like that. I thought our comm room had a lot of runs.
 
I've been out of the loop a long time, I wonder how much has changed & if installers still take as much pride in their profession, as we did then.

Not much has changed. Most installers switched to zip ties, the AT&T guys still focus on wax string, which is nice to see. Some of the newer guys don't give a shit, period... their work looks like ass. I know some wax string techniques, but I've been seriously considering of taking a class on it to learn its art.

Cabling has become more of an art now so while most facilities do not really care, some of us do. Our facility is done with precision and it looks great. Newton still remains a big player in structure and cable management, they did hit it good with bringing out more smaller elements and products and catering more to the data center side of things in addition to telco.
 
mynamehere and Ockie

You will be glad to know that the art of wax string lacing is still alive and well in the aerospace world. ;)

Hell I can still lace harness like nobody else, and I am out of practise by 13 years! lol

I use wax string lacing (usually nomex, kynar or PTFE based) for building automotive harness for standalone systems :)

http://www.hq.nasa.gov/office/codeq/doctree/87394.pdf

staring on page 41 - 44.

More knots than I ever remember ;)
 
They still use wax string at my work. Then again most of the guys are older men that have been doing this stuff since the telephone was invented. ;)
 
Not much has changed. Most installers switched to zip ties, the AT&T guys still focus on wax string, which is nice to see. Some of the newer guys don't give a shit, period... their work looks like ass. I know some wax string techniques, but I've been seriously considering of taking a class on it to learn its art.

Cabling has become more of an art now so while most facilities do not really care, some of us do. Our facility is done with precision and it looks great. Newton still remains a big player in structure and cable management, they did hit it good with bringing out more smaller elements and products and catering more to the data center side of things in addition to telco.

Kansas City Stitch and Chicago Stitch here
 
Single twisted pair unshielded was a dead giveaway that it's a telco office. Nobody else really uses wire like that. As for the electro-magnetic issue, that's all low voltage stuff, nothing to really worry about. Now i've seen some power cable trays that will stop your watch. It's really cool walking through a high voltage substation and having the hair on your arms stand up due to the static electricity.

I work for prisons in CA and they used 110 punch blocks up until a few years ago, so there's tons of twisted pair used there.
 
I have to agree with the original caption: yes, it is good that they don't have thousands of cables just hanging everywhere - but seriously, if you have a problem you're probably better off running a new cable over the top than trying to somehow trace/tone out the one that is at issue!
 
Back
Top