[H]ard to decide - Diamond or Copper

Rurki

Limp Gawd
Joined
Dec 18, 2006
Messages
150
Give me some ideas [H]ard Community.

A couple years back I made a water block base with a CVD diamond inlay.

I used a 1x1 500 micron CVD diamond heat pressed with 1-2 mil of tin/silver solder in to a shallow inlay on a copper base. Sadly I dropped the project shortly after I started. Baby was on the way and life generally got busier.

Time has come for me to build a new machine based on the Core 2 Duo processor. So the fate must be decided whether to continue a water cooling construction or mod a Zalman 9700/Tuniq Tower 120 or standard 9700/Tuniq cooling.

I will be cooling an E6300 or E6600 series on a Gigabyte D3 or Asus Deluxe. That also is undecided.

Attached are some photos of the original water block base.

1000859yf3.jpg

1000860xh3.jpg
 
I would consider a cheap 775 heatsink (arctic cooling freezer 7 ?), while continuing to work on the water. Don't give up what you start, but also don't delay the projects.
 
What would you recommend as a water cooling kit to go with the waterblock?
 
Back
Top