Guys need help urgently...testdisk doesnt seem to work...please help

Shirveen

n00b
Joined
Dec 26, 2008
Messages
3
I have a 500gb seagate barracuda SATA, used just for data storage not OS. Yesterday while booting up chekdisk decided that the drive needed checking then the system hung during repairing the MFT. So I rebooted and then windows did its bit about how the drive is unformatted, so i run testdisk and thankfully it seems all my files are intact so i follow the steps to repair the mft up until it asks me to reboot. After rebooting however windows still doesnt recognise the drive partition. What do i need to do? Please somebody, anybody help.

PS i already checked the MBR tool on testdisk and it says the boot record is fine so it cant be that
 
i'm having this same problem with testdisk, on a RAID0 which lost it's boot partition/mft information

i used testdisk to rebuild them, and i'm able to use testdisk to access the data on the drive, but i'm unaware on how to actually make windows see the drive as a partitioned local disk (it's currently saying RAW)
 
Restore your backup! Hard for me to trust MFT repair/crashing/etc. You can then use some recovery tools to pull only the important files that may have changed since your last backup.
 
not to be ignorant lol but what exactly must be restored and how? I tryed restoring the mft and mbr and still no joy so i'm planning on just getting another 500gb recovering the data to that then formatting my currently misbehaving 500gb. One thing i have learnt from all this is make alot of partitions on drives that have relatively high capacities, that way one mbr/mft fluff up wont jeopardise a sh*t load of data.
 
Make an image of your drive with something like dd_rescue and then use some data recovery software like getdataback to retrieve your files.
 
Back
Top