Guess That Motherboard!!

b2386

Limp Gawd
Joined
Jun 8, 2004
Messages
187
I found this motherboard in a closet in my house tonight. I have no idea how old it is. Can anyone tell me anything about this motherboard like what processor it uses, etc. I am clueless. The box contained the motherboard but I am not sure if it is the original. Thanks

Pictures%2F109%2D0974%5FIMG.JPG

Pictures%2F109%2D0977%5FIMG.JPG
 
Is there a way I can post the pictures straight from my computer and not from a website?
 
go for photobucket.com I like that. Have to sign up tho but free and direct linking.
 
everytime I do view this page I get a weird .net add someone to your account thing 2 times. When I go to post a reply it pops up a login name/password window to logon to your msn where you're hosting the pics. Either you linked the wrong thing, or your MSN account isn't setup properly to behave as a picture host, or you need to find a host that doesn't force people who lookup the pics to download their software or setup a specific account just to view them.
 
I'd like to meet the idiot who decided to put the IDE connectors over there.
 
b2386 said:
What kind of processor would someting like this run?
pentium 3 i'm guessing but man thats one rooted looking motherboard you got there and what are those big black slot things at the top. Not the dimm slots
 
b2386 said:
What kind of processor would someting like this run?

Pentium 1's, K6's, K6-2's, K6-3's, Cyrix MII's.

I would reccomend the K6-2's from 400-550mhz (550 is the max).
 
ChingChang said:
ISA slots. 16 bit bus I believe.

Lol. I feel old now, and I just turned 22....

ISA slot is almost the correct answer, but this is actually an EISA slot, which is an extension of (and backward compatable to) the original ISA standard. While the original ISA is 16bit, EISA is 32bit, doubling the available bandwidth to about 33MB/s, whereas 16bit ISA is ~16MB/s.

ISA/EISA typically operates at 8mhz.
 
mc_P said:
it has a pretty funky layout

The worst part about it is when you have an AIW Rage Pro (PCI), and try to install it... it hits the danged processor socket.... The third one down is a very tight fit with it.. but it works....
 
Schro said:
Pentium 1's, K6's, K6-2's, K6-3's, Cyrix MII's.

I would reccomend the K6-2's from 400-550mhz (550 is the max).


Yeah, listen to this guy. The best thing you can pop in that board in a 550k6-2.

P3's WILL NOT WORK.


That is all
Danny
 
A P3! freak'n noobs. Thats socket 370. I'm only 23 and I've gone from 8086 - 2 MHz running DOS 3.0 all the way up. Anyone remember the "Good old days" when you had to install the ram chips indivudialy and MFM hard drives were where it was at!
 
Kingofl337 said:
Anyone remember the "Good old days" when you had to install the ram chips indivudialy and MFM hard drives were where it was at!


Oh, you should see all the RAM chips that had to be installed on my IBM 5150 motherboard to expand it to 256k. Recently one of them went bad...no fun at all. Man, there was a time when I would have killed for a hard drive in that machine. :D
 
Nope, it's definately socket 7.

Here, look at this image. I lowered the brightness and increased the contrast around the CPU so you could make out the letters.
socket7.jpg
 
Hey i got a socket 7 motherboard sitting around here, ;)
Thanks for reminding me.

Time to make my file server....
 
dandragonrage said:
Nothing like throwing 3.3V at your new video card and frying it to hell and back!

What would happen if I stuck a 9600 Pro on the board?
 
the motherboard would probably fry, or at least the line going from the agp port to the psu would.. that's my bet.
 
That is a socket 7 board, supports a socket 7 proc, to a speed of 233ish. Cyrix, amd, p1...

udma 33
pci slots
isa slots
1x apg


sdram, pc66/pc100, looks like an at/atx board.

I have had boards older then that, where, the cpu was soldered to the board, and they had the old old school slots...
 
b2386 said:
What would happen if I stuck a 9600 Pro on the board?

It would fry, ever see the giant "STOP!!!!!!!! STOP AND READ AGP 8XXX!!!!!! CAUTION! HAZARDOUS! RADI-FREAKIN-ATION!!!" Stickers plastered all over newer motherboards?


Supporting 100mhz sdr, it would seem to go higher than a 233, i would think more like a 350+ or so. Shouldnt be to hard to tell, it looks like the multiplier jumper chart is right by the socket. Cant quite make it out though.
 
Wixard said:
It would fry, ever see the giant "STOP!!!!!!!! STOP AND READ AGP 8XXX!!!!!! CAUTION! HAZARDOUS! RADI-FREAKIN-ATION!!!" Stickers plastered all over newer motherboards?


Supporting 100mhz sdr, it would seem to go higher than a 233, i would think more like a 350+ or so. Shouldnt be to hard to tell, it looks like the multiplier jumper chart is right by the socket. Cant quite make it out though.

The board supports upto a 550mhz K6-2 or K6-3- it is based upon the VIA MVP3 chipset, which also supports ATA66 (so drives upto 137GB should be fine), 2x AGP (this means you can run any native 4x AGP card, but NOT 8x cards unless they are specifically compatable w/ 2x (some of the first could run in 2x slots, iirc). The 9600Pro is not specifically compatable with 2x, but the 9500Pro is compatable. You can get a 6x multiplier out of this thing to run your K6-2 @ 600- the trick is to set the jumper to 2x, and it jumps to 6x.....

Wixard- the stickers are on the boards because they will fry if you put a 2x card in them because it uses a much higher signaling voltage that the power regulators can't provide. Video cards are generally more forgiving than boards, such that, when no 2x cards will work in 8x boards, many 8x cards will work in 2x boards.
 
It would fry the video card. The motherboard is going to throw 3.3V at it. The card will die a horrible, horrible death.
 
Back
Top