GTX 285, HDMI Related issues

Pitcrew

n00b
Joined
May 21, 2009
Messages
17
Hi all-
I just built a system and seem to be having resolution issues after updating some drivers.

Long story short, when I first loaded VISTA Home Prem. 64 the resolution was full screen at 1280 x 1024 (or whatever the default is before you load drivers for the video card or MB. After updating the ASUS P6T Drivers, the resolution on the TV (40") will not go higher then 1280 x 1024 and there are about 8 inches on both sides of the screen where there are black spaces. Adjusting the settings on the TV will work if I go to the FULL stetting but the desktop cuts the tool bar on the bottom off and and some of the screen on the other sides. When I go to adjust settings for resolution, there are no options for adjusting resolution on the GTX 285 its self. As if the drivers for the video card are not working. The video card shows up in the device manager section with no issues.

Just wo ndering if anyone else had the issue or has a solution. Thank you for your time.
 
We'll need to know exactly which TV you are using (brand, model number). Some TVs don't behave very well as computer monitors.
 
Samsung
40" Touch of Color™ 120Hz 1080P LCD HDTV
Resolution: 1920 x 1080
Dynamic Contrast Ratio: 80,000:1
Response Time: 4ms

Thanks
 
Samsung
40" Touch of Color™ 120Hz 1080P LCD HDTV
Resolution: 1920 x 1080
Dynamic Contrast Ratio: 80,000:1
Response Time: 4ms

Thanks

You should specify which model number as well as there are many different variants such as 630, 750, 850, 950 and such
 
LN40b610 LCD TV

*
Screen Size: 39.9" (diagonal)
*
Aspect Ratio: 16:9
*
Resolution: 1920 x 1080
*
Dynamic Contrast Ratio: 80,000:1
*
Response Time: 4ms
*
Refresh Rate: 120Hz
*
Game Mode
*
HDMI-CEC
*
Wide Color Enhancer
*
USB 2.0 (MPEG Support)
*
Touch of Color™
*
USB 2.0 (Movie,JPEG)
*
Dimension Set size(WxHxD): 39.3” x 27.5” x 10.0” (w/ stand), 39.3” x 25.1” x 3.1” (w/ out stand)
*
Weight: 42.8 lbs (w/ stand), 32.6 lbs (w/ out stand)

Audio:

*
Sound Effect System: The sound effect system produces 5.1ch streophonic sound with the left and right speakers
*
SRS TruSurround HD™
*
Sound Output(RMS): 10wx2

Inputs/ Outputs:

*
HDMI x4 (3 rear, 1 side)
*
composite (AV) x2 (1 rear/ 1 side shared)
*
Component x2 (rear)
*
USB x1 (side)
*
PC input (D-sub)
 
are you able to access the nvidia control panel/resolution?

you may need to uncheck or check "Treat monitor as HDTV"
 
Thanks everyone...fixed the issue. For some reason cannot use an HDMI cable with this TV and my comp. Seems like they do not get along. Threw in the standard DVI and all works. Thanks again!
 
Back
Top