GTX 280 power requirements

btx

n00b
Joined
May 11, 2005
Messages
23
Heh, I was looking for a GTX 260, but I ended up ordering a 280 due to all the deals. My current rig runs a Q6600 with a Corsair 520. Do I need to be on the lookout for a new PSU? I've read conflicting things on the net...thanks
 
how many power connectors does the GTX 280 need? I have 4 6pin connectors and 1 8pin which I use for my motherboard. I heard somewhere that the GTX 280 needs 1 6 pin and 1 8pin?
 
how many power connectors does the GTX 280 need? I have 4 6pin connectors and 1 8pin which I use for my motherboard. I heard somewhere that the GTX 280 needs 1 6 pin and 1 8pin?

The current *stock* 65nm GTX 260 requires 1x6pin and 1x8pin power connections. The upcoming new GTX 285 55nm version requires 2x6pins due to reduced power consumption. I'm gonna trade up my eVGA 260 192 to this next week, as I can run it on my current PSU now vs the old 280 design

http://www.evga.com/articles/00445/
 
I jumped on that deal also, and I have the Corsair 450watt. The Corsair PSU Finder says im good for both GTX 260 and 280. I only run Q6600 with 4GB ram and 1 hard drive though.

edit: linky I even asked the PSU forum about it.

These are all overclocked video boards, though, correct--? If I tick that checkbox, the PSU finder (didn't know it existed..hehe) pushes it to the 600 range. If you do push the power supply to far, what are the consequences? Does it just crap out or do you get failed components?
 
A good PSU won't provide more power than it can safely provide. Your GPU will be power starved and throttle itself automatically (nv's done this at least since the 6000 series), and you'll be informed by their driver software of the fact when booting windows.

A crap PSU will release magic smoke, possibly including that stored in everything it's attached to.
 
If you overload a PSU, it will either shut off due to OCP, or if OCP is disabled, it will probably die. However, the amount of power you would have to pull from an HX520 to kill it is rather high. There's no way that you would get anywhere its limits, even with an overclocked 65nm GTX280.
 
I'm in the same boat with a Corsair 520W, but I only have a C2D. From what I've been reading there are people who are running quad cores with the GTX 280 on this PS. It sounds like the Corsair should be able to handle it, unless you have a ton of extra drives and things running in your case or if you're doing extreme overclocking of both CPU and video card. I only have 2 drives, a DVD and no other PCI cards, so I figure I should be okay if others are running this card with quad cores.
 
I may have to upgrade then.
Probably not. Your current PSU should be able to handle it.
I'm in the same boat with a Corsair 520W, but I only have a C2D. From what I've been reading there are people who are running quad cores with the GTX 280 on this PS. It sounds like the Corsair should be able to handle it, unless you have a ton of extra drives and things running in your case or if you're doing extreme overclocking of both CPU and video card. I only have 2 drives, a DVD and no other PCI cards, so I figure I should be okay if others are running this card with quad cores.
The HX520 can handle a GTX280 no problem, even with a quad. With a dual-core, it obviously can as well.
 
@Zero82z
I have a Creative X-FI Platinum coming in the mail as well. Do you know if this will make a difference at all with power?
 
Nothing significant. I would not try overclocking much though. If you do want to overclock, then a better PSU would be a good upgrade. The VX450 will be enough for stock operation, but don't push it.
 
Back
Top