GTX 260/280 waterblocks

n00zler

Limp Gawd
Joined
Nov 13, 2002
Messages
344
What are people using? There are several around that I've seen (really love the look of the Aquacomputer one, but can't seem to find it from a US store and don't really wanna pay 120+ international shipping for it). Anything people love or would say to steer clear of? If it matters, I will be running SLI.
 
I really like my swiftech MCW 60-r and a d-tek uni-sink. It required some mods to amke the uni-sink work wiht a swiftech block though.


If I were you I'd grab a D-tek fuzion and a uni-sink, the fuzion will be re-usable with newer cards down the road so it will save money and works perfect.
 
I've been happy with my mcw60 for the last 2 generations. I had it on my 8800gtx for a while with the swiftech ramsink set. Then I recently put it on my gtx260 with the swiftech one piece ramsink. Temps under load never go above 40c.

Old card

IMG_0456.jpg



New card

IMG_0505.jpg


IMG_0506.jpg
 
I use the ek full covers with the black aluminum heatsinks for the ram on back of the cards. I heard of flow/leaking/card cracking issues with the back water block so I stayed away. I run f@h all the time and it keeps my cores under 49c and even though the ram doesn't get much airflow on back, it stays cool enough to not have any issues. Highly recommended.

 
Thanks for that Aquacomputer link. As soon as the 285s come out (assuming the current GT200 waterblocks are compatible) I'll be buying some :)
 
Thanks for that Aquacomputer link. As soon as the 285s come out (assuming the current GT200 waterblocks are compatible) I'll be buying some :)

I know where you can get a great deal on the Aqua 260/280 coolers:eek:
 
Im happy with my Dtek GFX Fuzion V2 and GTX2x0 unisink. Looks pretty good too IMHO if you care about aesthetics.

As far as temps...its a GTX260 clocked at just over 700...in a single loop with a Q6600 OCed to 3.6ghz and 1.5v...and temps are in the mid/high 50C on the GPU with an ambient temp close to 80F (I crank the heat up in the room for stress testing--furmark on GPU / Prime95 on CPU). Thats with two MRC240's and a BIP 120...all with very low speed fans.
 
I use the XSPC full cover block currently. It cost $72 from NCIXUS.com and $80 from Jab-tech making it a viable solution. The only issue I have with it is that you use the OEM backplate which will block the back screw holes for the fittings. I got around this by using some Zalman memory sinks instead of the backplate. I am running two GTX280's in my system, one water cooled and the other using the stock cooler. The water cooled one hits 43c under heavy gaming while the stock one hits 65c under heavy gaming (it is also the second card if that matters). I have been looking at Koolance, NCIXUS.com has them for $95, but they are currently out of stock, may have some more in two weeks.
 
EK Nickel-Plated Full Cover blocks are the sexiest on the market...:D

I'd also get with "theseeker", he's got the hookup on some pure Aqua-Computer goodness:D
 
EK Nickel-Plated Full Cover blocks are the sexiest on the market...:D

Just ordered a pair of them yesterday, can't wait to see those bad boys in person.

The aqua's look nice at first, but i just really don't like that they don't have the double sided fitting holes for a sli setup. I mean if you gonna spend the cash on fc's it just seems kind of silly to me. That issue aside, I must agree though that they're certainly very nice looking.
 
Just ordered a pair of them yesterday, can't wait to see those bad boys in person.

The aqua's look nice at first, but i just really don't like that they don't have the double sided fitting holes for a sli setup. I mean if you gonna spend the cash on fc's it just seems kind of silly to me. That issue aside, I must agree though that they're certainly very nice looking.

The Aqua cards have a Twinconnect to work in SLI. I have the Aqua's and the EK's they both work in SLI.
 
hmm. i was looking at the pics of them over on sidewinder and they only show the two ports on one side. I know you could still loop it around to the next card, but meh.

But how's this 'twin connect' on them work out? is extra ports on the other side of the block an 'option' or something or is it a different sort of method?

I see they say on the product description 'sli-compatible with appropriate fittings', but that's really quite vague, could say that about any block in existence.
 
EK Nickel-Plated Full Cover blocks are the sexiest on the market...:D

With the black Delrin top, I would agree. But, I think they're only SLIGHTLY ahead of the Koolance VID-487 blocks, now that they've stopped using aluminum :)
 
I havee no inside shot of this block available but it is comparable to the aquagrafx GTX 280/260

NVIDIA_GTX280_6.jpg
 
These are, IMO, the best looking waterblocks for the GT200/b range out there :D Awesome work :)
 
the AC look the best probably but having the nozzles on the bottom makes them less desirable. How do you run a hose up from there? I would think it would be simple to add nozzle holes on the top too.
 
It is very likely that we will also offer a twinConnect kit for the new blocks so you can exchange the top cover with another:

23463.jpg
 
Awesome! Can't wait for that. My 285's are on the way, so I'll be needing some :)
 
Back
Top