• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

GPU bracket recommendations

Comixbooks

Comixbooks

Fully [H]
Joined
Jun 7, 2008
Messages
25,949
I have a bracket with my case but if I install the bracket it covers like a 1/3 of the fan.
Anything better?
 
Last edited:
I'm running a small fabric USB strap with a nylon loop (packaged with multiple SD card + USB readers I bought in the past) to tie it to the protruding drive cage in my case, while I look for a permanent solution. Surprisingly, being a dark nylon loop, it's almost invisible so it doesn't look bad.
 
I installed the bracket that came with my case it's overlapping the 3rd fan there is some clearance.
I just ran Superpostion benchmark and temps are fine the fan doesn't seem to show any drag or resistance thing I'll just stick with it. I was thinking of picking up a dremel took and cutting off maybe 1/2 inch. It's a plastic bracket that came with my Bitfenix Shogun I have two extras if I decide to cut some off.

128551889_4218504358166511_8377508222298631258_o.jpg
 
You must log in or register to reply here.
Back
Top