Good MATX mobo for mobile gaming rig?

Satyrist

Gawd
Joined
Mar 12, 2001
Messages
724
What would rate well for a MATX board that would be used for a gaming rig?

I'm looking at possibly getting one of the newer Aspire X-QPACK cubes and using it. I'm currently running on a NF7-S v2 setup, what might be comprable/(distant chance)better as an upgrade?

MATX is going to be limited as far as overclocking goes, but what would work well with some options beyond basic tweaking, though? If it came down to it ultimately, what would work best stock?

Is a 939/940 board possible? I'd suppose if you could put a budget on it, $500 might be tops. If it's anything using PCI-E x16, I'll need a new vidcard too, I realize.

I suppose I'd like to stay away from anything based solely around VIA chipsets (been burned a few too many times)

Is this a realistic goal?
 
Do an AMD motherboard search on Newegg; search for 939 pin, micro-atx.
Those 4 boards are your 939 socket choices.

FoxConn sucks, it has so many problems that some people can't even get low lat ram to even run on it.
ESC is untrusted.

MSI is the lesser evil. 4 dimm slots and the kick ass xpress 200 chipset.


None of them overclock worth shit.


 
Any reason you cant just get a shuttle? They come with an HSF, a motherboard, a PSU plus a front panel so your not missing out on anything, plus they're pretty small. They come in PCI-E and AGP models too.
 
FunkStar said:
Any reason you cant just get a shuttle? They come with an HSF, a motherboard, a PSU plus a front panel so your not missing out on anything, plus they're pretty small. They come in PCI-E and AGP models too.
shuttles are limited for future upgrades ;)
 
FunkStar said:
Any reason you cant just get a shuttle? They come with an HSF, a motherboard, a PSU plus a front panel so your not missing out on anything, plus they're pretty small. They come in PCI-E and AGP models too.

Looks, lack of PCI slots, lack of power, lack of room.

The X-Qpack can hold a 500W PSU, 3 harddrives, 1 optical, 1 6800 Ultra, 4gbs of ram, an audigy 2 zs; not to mention better cooling, like the 120mm exhaust and room for the zalman coolers.

 
MeanieMan said:
Looks, lack of PCI slots, lack of power, lack of room.

The X-Qpack can hold a 500W PSU, 3 harddrives, 1 optical, 1 6800 Ultra, 4gbs of ram, an audigy 2 zs; not to mention better cooling, like the 120mm exhaust and room for the zalman coolers.

so basically they are limited for future upgrades :p
 
Satyrist said:
I seem to recall that heat doesn't necessarily make bad caps deteriorate faster...It likely doesn't help though.


Could be true, but why would ABIT make the OTES Mosfet system?
 
if you want to stay with socket a, i have a never used msi k7n2gm2-lsr for sale on the for sale forum. sata, nvraid sata/pata, 0,1,5, jbod, hardware soundblaster, lan, integrated gf4 mx, for a little more than the price of a gf4 mx.
i am doing the same as you, i got an aspire as a gift. the only socket 939 micro atx readily available are an ecs radeon xpress 200 and a msi radeon xpress 200, also 2 versions of a foxconn nf4. no way i am buying a foxconn, i have had bad luck with msi, which also has limited bios options. i ordered the ecs this morning mostly because i have 50 or 60 customers with ecs socket a boards (i think it was sis 735 chipset) and have never had to replace one, unlike the abit, msi and gigabyte boards which i service all the time. $82 price didnt hurt either.

very truly yours,
politenessman
 
bmartin said:
Could be true, but why would ABIT make the OTES Mosfet system?

Because mosfets get bitching hot, the capacitors are not so much the problem.
 
ScHpAnKy said:
Because mosfets get bitching hot, the capacitors are not so much the problem.

Correct...they try to sink some of the heat into the mainboard, but you can only put so much heat into the board...

Quite a few server boards have sinks on the power mosfets...

The IRL3103S on a few of my main boards is rated for a maximum power dissipation of 94 Watts...that's more than the XP3200+ at 77W maximum thermal output...
 
You are going to laugh but look at the Socket 754 ASRock K8 Upgrade SiS760 motherboard. It has a PCI/AGP bus lock and preforms nicely. Pair with an Athlon 64 and off you go. :)
 
CentronMe said:
You are going to laugh but look at the Socket 754 ASRock K8 Upgrade SiS760 motherboard. It has a PCI/AGP bus lock and preforms nicely. Pair with an Athlon 64 and off you go. :)


nice but overlooked chipset thats on many s754 micro atx boards.

very truly yours,
politenessman
 
perp said:
i ordered the ecs this morning mostly because i have 50 or 60 customers with ecs socket a boards (i think it was sis 735 chipset) and have never had to replace one

That'd likely be the venerable K7S5A...Solid, once you've overcome some of it's quirkyness-Though not everyone experiences that.
 
Satyrist said:
That'd likely be the venerable K7S5A...Solid, once you've overcome some of it's quirkyness-Though not everyone experiences that.

I still have one (K7S5A)...runs Bartons without a hitch at 166(333) FSB...even though it only officially supports 266...

MD
 
fine board. was my bottom end board until last year - now asus a7n series is my go to board for cheap systems.

very truly yours,
politenessman

ps as to original question - ecs rs480m no longer at newegg. i must have got the last (only?) one.
 
As to answer one question,

How would the MSI ATI Xpress 200 board (stock) compare to the Biostar K8NHA-M Grand? (overclocked)

With say, a 3000+-3200+ CPU.

And how much of a performance upgrade could I expect to see upgrading from a NF7-S w/xp-m 2500+ @180fsb and 1gb pc3200 2-2-2-11?

The Biostar would be nice as I could keep my 9700 for another upgrade, but if gains will be not worth it, maybe I'll keep waiting for s939 matx to mature some more.
 
perp said:
fine board. was my bottom end board until last year - now asus a7n series is my go to board for cheap systems.

very truly yours,
politenessman

ps as to original question - ecs rs480m no longer at newegg. i must have got the last (only?) one.

How's that rs480m working out?
 
Back
Top