Golden Shellback Electronics Waterproofing

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
You guys have to see this waterproof coating for your electronics devices. The video below shows several devices, including an iPod Touch, being submerged in water while they are running. Very neat stuff.
 
I'd be interested to find out a little more about this product.

It would be great to have my electrical components in my truck coated so I can submarine it (seriously).
 
For a minute I thought it was that water stuff that I saw on tv a while back that doesn't conduct electricity. They did a similar demonstration submersing electronics into a tub of water. Difference is that the electronics weren't coated with anything, it was the liquid that didn't conduct any electricity.
 
I wonder how fast this stuff wears off? and what kind of warranty Golden Back provides for devices that do fail.
 
All my life I've had to be cautious about not getting my hearing aids wet from rain, sweating or whatever. It breaks super easily when it gets the slightest bit wet, even from heavy humidity in the air. I wonder if this thing would work for hearing aids too.
 
wonder how long it lasts? can you put this on high temperature parts in computers? :eek:
 
I wonder if it would work well with a cell phone.

Cellphones was the reason why this product was invented. Apparently the inventor accidentally washed two of his daughters cellphones, that gave him this idea.
 
I think he said they had something submerged for 470 hours or something like that taking it out only to recharge the battery.

What i don't get though is if it's completely coated in this stuff, headphones need to conduct electricity to play music, to charge the device a electrical contact must be made. It doesn't seem possible unless when they do the coating they apply it to all the parts but those parts, or the coating is broken once pressure is applied to it or something.
 
This would be very useful as far as coating say video cards and motherboards for protection from watercooling "accidents"

:)
 
I wanna see how this plays out, if it turns out to be 100% legit with no noticable change to the device (I'm a little concerned with touch-screens) and still full ability to use ports (it' spossible to do this with a compound that will split to allow the port in and then clsoe back up as it's removed, like silicone) then this would be the best Idea I've seen in decades.

I wonder how well it hold sup against scratches though and repeated taps on a screen...
 
If spillages do occur and the coating doesn't protect your device, use ShamWow! to clean up your mess!
 
I'm not sure this is the end all solution. As far as someone here said, video cards, motherboards, stationary electronics with no moving parts, for those, this product makes perfect sense.

But the cell phone, while it protects the motherboard, what about the speaker and the microphone. If you coat those, you'd reduce the output and nearly kill the microphone. This doesn't make sense.
 
For everyone asking about headphone jacks or other similiar connections, i dug into the site and read this comment by one of the developers of it:

The coating uses ideas learned from the manufacturing of semi-conductors so it’s bonding at the molecular level. Speakers and touch screens are seemingly unaffected. The contacts need to be masked, either by coating the device with plugs attached or applying tape.
 
I'm going to guess that this will not work quite as well as envisioned. It's not only the headphone jacks, charger jacks, etc. but things like a SIM card, and other various connections inside of electronics that would be unprotected, still leaving vulnerable spots for corrosion damage.

Also, if you look closely at the video where they have the iPod playing the 80's song, there appears to be something covering the iPod, look near the left side and there looks to me like some crinkled cover over it, perhaps plastic wrap or something. Also, who's to say that this liquid is even regular water, it could be distilled or an otherwise non-conductive fluid.

I'd like to be proved wrong, but a company that seems to have just popped up in the last month or so, with a technological breakthrough that no other large chemical company has been able to solve just sounds like it's "too good to be true".
 
I'm going to guess that this will not work quite as well as envisioned. It's not only the headphone jacks, charger jacks, etc. but things like a SIM card, and other various connections inside of electronics that would be unprotected, still leaving vulnerable spots for corrosion damage.

Also, if you look closely at the video where they have the iPod playing the 80's song, there appears to be something covering the iPod, look near the left side and there looks to me like some crinkled cover over it, perhaps plastic wrap or something. Also, who's to say that this liquid is even regular water, it could be distilled or an otherwise non-conductive fluid.

I'd like to be proved wrong, but a company that seems to have just popped up in the last month or so, with a technological breakthrough that no other large chemical company has been able to solve just sounds like it's "too good to be true".

That plastic cover is just a scratch guard for the screen that comes with every phone right when you buy it. It doesn't do squat from protecting it against water damage.
 
IMHO this is complete BS! I know that these coatings have been around for a long time. The thing that makes me skeptical is the fact that he used headphones underwater because that would ruin the headphones. Since they didn't that means that he is using distilled or deionized water wich isn't conductive!
 
I'm not sure this is the end all solution. As far as someone here said, video cards, motherboards, stationary electronics with no moving parts, for those, this product makes perfect sense.

But the cell phone, while it protects the motherboard, what about the speaker and the microphone. If you coat those, you'd reduce the output and nearly kill the microphone. This doesn't make sense.

if they use a vacuum to apply the waterproof coating then it must infiltrate everything in the device. However, it may change the dynamics of speaker because it is a coating and therefore may have to saturate itself onto permeable parts like speaker paper, but it would be waterproof nonetheless. Just a guess.
 
Hmm. I wonder how well this stuff would work in coating a motherboard and cpu without a heatsink and dunking it in distilled water for immersion cooling purposes.
 
It sounds interesting. Just will be interesting to see how they work around a few issues.

How does it work with sockets and connectors? Will water then be able to infiltrate the pins?

As was noted before, how will it react to speakers, mics, and touch screens?

Will liquid still cause problems around data jacks and battery charge ports?

Remember, this is designed to provide protections from accidental spashes and baby drool. While they may be demonstrating it with complete immersion, that is not the intended apllication. Are you going to send in your $50 phone in for a $75 treatment that prolly takes a week to apply and return to you? The new iphone, prolly.

Don
 
The coating uses ideas learned from the manufacturing of semi-conductors so it’s bonding at the molecular level. Speakers and touch screens are seemingly unaffected. The contacts need to be masked, either by coating the device with plugs attached or applying tape.

http://golden-shellback.com/
 
I like the "Important Notice" at the bottom of their website:

Important Notice

Northeast Maritime Institute, Inc. makes no representations or warranties, express or implied, as to the completeness and accuracy of the information contained in this document. The information is supplied based on tests performed by Northeast Maritime Institute, Inc. that are believed to be accurate and reliable. Individual results may vary due to differences in tests types and conditions. Northeast Maritime Institute is not responsible for damages resulting from the use of or reliance upon the information.

So they make no representations or warranties that the information supplied is accurate, but they tested it themselves. Talk about a confidence booster in their own testing methods. :D

cheers,

yass
 
I like the "Important Notice" at the bottom of their website:

Important Notice

Northeast Maritime Institute, Inc. makes no representations or warranties, express or implied, as to the completeness and accuracy of the information contained in this document. The information is supplied based on tests performed by Northeast Maritime Institute, Inc. that are believed to be accurate and reliable. Individual results may vary due to differences in tests types and conditions. Northeast Maritime Institute is not responsible for damages resulting from the use of or reliance upon the information.

So they make no representations or warranties that the information supplied is accurate, but they tested it themselves. Talk about a confidence booster in their own testing methods. :D


cheers,

yass


Why should they make warranties? They just sell the waterproof sealant. They're not responsible for customer stupidity.
 
I'm more impressed with Patricks use of the word "ignominious" then the product itself, honestly.

*makes a point to add that to his vocabulary.."
 
If this makes it to market I DEFINITELY have a few things I would get coated. Not only would I have my mobile devices coated but my keyboards/mice and other components in my vehicle as well as the other poster mentioned. As far as the coating affecting touch screens,technically the screen itself probably doesn't need to be coated at all as the glass is already water proof. They would probably just put a screen protector on it before they ran it through the process.
 
Why should they make warranties? They just sell the waterproof sealant. They're not responsible for customer stupidity.

It's not that they aren't offering any warranties -- the disclaimer pretty much says they are not responsible for accuracy of their own test. Which I find it to be kinda ironic. Anyway I just thought it was worded somewhat differently than a standard disclaimer that at least says their own testing methodology is sound, but your mileage may vary.

cheers,

yass
 
It seems like it would be a lot more effective and a lot cheaper if the manufacturers coated them before they were assembled.
 
So, can I coat a motherboard/cpu with this stuff? If so then I would think that I could connect an ac duct directly to my pc without worrying about condensation.
 
Hell...if someone does an entire motherboard and other pci cards...whats to prevent you from submerging the whole system in water?
 
I think that would only work if the CPU were soldered to the MOBO. Otherwise moisture would seep into the socket and cause problems.

While they are testing devices with complete immersion, that is not the intended use. It is meant to make your device splash resistant. You will not have a SCUBA capable PDA when they are done. But, if you dump a glass of water on it, it may still work after you shake the water out of it and towel it off.

Don
 
For a minute I thought it was that water stuff that I saw on tv a while back that doesn't conduct electricity. They did a similar demonstration submersing electronics into a tub of water. Difference is that the electronics weren't coated with anything, it was the liquid that didn't conduct any electricity.

that only applies to really pure water. most water is partially conductive hence it fries your electronics.
 
Back
Top