God Almighty How Much Juice Does This Suck???

Joined
Apr 5, 2004
Messages
549
I bought a sapphire radeon 9800pro card and windows XP pro for my rig....freshly installed them both then wanted to see what it could do so I installed a demo of far cry, cranked the graphics up and played about a minute then the computer shut down and would not start again...I found it literally melted the PSU
it requires power from the molex connectors and am not sure if it can be hooked with anything else on the same circuit it WAS sharing one with my hard drive and the only other 2 available are hooked to CD burner and DVD player I had a 300PSU and had a spare 300watt psu I am currently using... my rig specs. are:

AMD +1800XP
Gigabyte GA-7vx mobo
1 gig kingston ddr 333
creative SB live platinum w/live drive
Quantum fireball AS 40GB HD
Aopen 12x cd-burner
Pioneer slot-load DVD 104-s
Sapphire Radeon 9800 Pro
300watt psu (ATX) 2 channels
windows XP PRO OS

currently I am not having a problem but I am scared if I try cranking the graphics up I will melt another one, is the 300 watts adequete or should I go to a 400watt or larger yet? and can you get them with more than 2 channels?
 
id get at least an antec 400Watt psu, try to go for a truepower, they are the best and are a very nice investment.
 
I was thinking about a 450 watt one, I have another hard drive I did not install for fear of further damage, my supplier does not stock ANTEC PSU's can u reccomend any other good ones?
 
400wat name brand power supply should be fine.

The one that you melted was generic I am guessing?

I have only a 300wat enermax, which I have had for a while running an athlon xp 2400+, a 7200rpm sata seagate, a dvd, and cd burner, and an aiw 9800 pro with no problems so far.

There is a lot more to power supplies then the rated power, name brand means a lot.
 
my supplier has Enermax, Thermaltake, and UPS as well as some cheap-o ones, of the 3 brand names which is the most reliable?
 
Enermax.

Some would argue that the Enermax is actually superior to the Antec line. It's debateable, but a powerful Enermax is a good PSU.

Be sure that the problem is actually the PSU, though! I accidentally fried one of mine when one of the molex connectors had 2 of the pins come into contact with a case screw that was sticking up. Shorted them out, and 4 lines of the the power cable running to that molex all melted together in a gooey mess. PSU was toast, too.

Since then, I've been VERY careful about tying my cables up.
 
Originally posted by V0ltage
id get at least an antec 400Watt psu, try to go for a truepower, they are the best and are a very nice investment.

Yes they are :D , had mine for awhile and love it still. I really liked that it came with 2 molex already gigured for the 7v mod to keep my case fans quieter.
 
Antec's are nice, but not the best. That honor belongs to PC Power&Cooling or Fortron.
 
I have an enermax. Have had it for years. Love it. Can't even hear it running either. Has a 92mm fan and an 80.

Rock solid voltages too. the 3.3 is a little high at 3.4, but hey...that just saves me the trouble of a 3.3v line mod.
 
MOAR!@!!@$@!POWAH!@#!

:)

Never a bad thing.

Cheers,

Mr. Pain

-- I especially love it when my lights dim when I initially boot my system.....
 
Originally posted by Stanley Pain
-- I especially love it when my lights dim when I initially boot my system.....

I went overkill on the sub instead of the PSU. PSU is 430w Enermax...Sub is a 500watt Infinity Perfect 12. Gives a whole new depth to explosions....:D
 
Originally posted by dderidex
Enermax.

Some would argue that the Enermax is actually superior to the Antec line. It's debateable, but a powerful Enermax is a good PSU.

Be sure that the problem is actually the PSU, though! I accidentally fried one of mine when one of the molex connectors had 2 of the pins come into contact with a case screw that was sticking up. Shorted them out, and 4 lines of the the power cable running to that molex all melted together in a gooey mess. PSU was toast, too.

Since then, I've been VERY careful about tying my cables up.

What kind of PSU was that? It should of shut down instead of melting.
 
Originally posted by foreignkid
pics?

I don't have my camera back from the shop yet, but here's a pic of the sub. Exact model, except the speaker itself is a Perfect 12 (and that fancy silver ring around the speaker isn't on since it won't fit with the Perfect 12 installed). No noticeable difference in sound between the one that came with it though...so the perfect 12 may go back into the vehicle and the original back in the enclosure. Too bad I'll have to give it back to the owner in a couple months...:(

sub
 
the newer ATI cards require at least a 350 watt powersupply.. so you were running it incorrectly.. gg you.

~Adam
 
rig in the sig on enermax 330watt and other stuff:

1x 160gig seagate ata100
1x 80gig WD ata100
1x 52x??x?? cd-rom/CD-R/CD-RW
1x 16x DVD player
1x "normal" case fan
2x 80mm Sunon HIGH flow (50CFM) case fans.

Gotta vouch for enermax. Thing doesn't flinch at anything so far. I just put the two case fans in today (GREAT for airflow, case temp down from 36C full load to 28C. . .and the room is 24C :D) and I'm within 3% of all voltages except -5v, which is 8%. Dunno what that one does, though.

A quick survey of howstuffworks.com's chart says I pull ROUGHLY 290-ish watts at full load, assuming 50W for the proc, which I think is being very generous. Yay for electricity. :) :D
 
I run a 9700 Pro AXP 3200 and a DVD+RW on a 200 Watt psu, granted its a Mini PC, but it works. The Key is a quality powersupply, I'd take a $60 350 watt Antec or Enermax over a 700watt Deer power supply for $15 any day of the week
 
Back
Top