Go me, 1st ever OC'ing

justin82

Limp Gawd
Joined
Aug 8, 2004
Messages
404
http://valid.x86-secret.com/show_oc?id=35272


w00t with the help of eclipse and the forums. go me.

Specs:

DFI Lanparty UT NF4 SLI-DR
Mem divider 5/6
2x1gb sticks of crucial value (FBGA) @ 2.6v 3-3-3-8 1T 236mhz
Venice 3200 @ 2.6 vcore 1.52V HTT 289mhz

someone w/ more experience could probably go higher.
 
yea im betting I can go higher too. But I will have to drop the ram divider b/c these 1gb sticks of crucial value top out at about 245 stable @ stock voltage and timings
 
Elysian said:
thats not bad but i'd be willing to bet you could get higher...


http://valid.x86-secret.com/show_oc?id=35277
*cough* that's nothing. on air:
http://valid.x86-secret.com/show_oc?id=16889
:p

anyway, it's looking good justin. just cause i forget already, you should tell everyone what the HT link multi is at :D
also, one way that sorta gets the chipset temps down (at least in theory), disable everything that you're not using in the bios. for example, i disable:
sata 1+2
parallel port
firewire
IR port
..and such stuff. you get the idea.
another option would be to take off the chipset heatsink, clean both surfaces off and whatnot and reinstall with some new thermal paste. sometimes there's not enough paste on there for good contact :(
 
Congrats, I'm getting a 3500+ venice and this will be my 2nd OC. Hopefully all goes well because A64 seem extremely complicated to OC. I spent about 3 hours last night reading about it trying to get an idea of what I'm up for and I still haven't yet got it all figured out...
 
(cf)Eclipse said:
*cough* that's nothing. on air:
http://valid.x86-secret.com/show_oc?id=16889
:p

anyway, it's looking good justin. just cause i forget already, you should tell everyone what the HT link multi is at :D
also, one way that sorta gets the chipset temps down (at least in theory), disable everything that you're not using in the bios. for example, i disable:
sata 1+2
parallel port
firewire
IR port
..and such stuff. you get the idea.
another option would be to take off the chipset heatsink, clean both surfaces off and whatnot and reinstall with some new thermal paste. sometimes there's not enough paste on there for good contact :(
mines still stock hsf
 
(cf)Eclipse said:
*cough* that's nothing. on air:
http://valid.x86-secret.com/show_oc?id=16889
:p

anyway, it's looking good justin. just cause i forget already, you should tell everyone what the HT link multi is at :D
also, one way that sorta gets the chipset temps down (at least in theory), disable everything that you're not using in the bios. for example, i disable:
sata 1+2
parallel port
firewire
IR port
..and such stuff. you get the idea.
another option would be to take off the chipset heatsink, clean both surfaces off and whatnot and reinstall with some new thermal paste. sometimes there's not enough paste on there for good contact :(


GREAT!! Thanks for the idea on lowering the chipset temp never thought of that. This is also another way i was thinking of :-p http://www.techpowerup.com/reviews/Mips/DFIFreezer/
 
(cf)Eclipse said:
you read my oc guide? :D

Yes and it has helped quite a lot actually. I'm still trying to figure out what the opitmal settings will be for getting a 3500 venice to 2.5ghz when my ram limit is 200 2.5-3-3-8. I'm sure I'll understand it all better once I actually get everything and fool around with it a bit.
 
The sad thing is I don't know why using 208mhz vs 200 would make things easier for me. Math was never my specialty so reading a lot of these guides is like trying to decipher cyrillic to me :( I do have a general understanding though... 11x230 = 2530 133/230 eventually = 138mhz actual memory speed?

or 10x250 = 2500 166/250 = 175mhz actual memory

How did you get the 208? 2.5ghz is just a general goal for me btw, I really want 2.7 or higher.
 
I've got this all wrong don't I? That sad thing is my grandfather was a mathematics professor.


I don't think I full understand how the dividers work yet and I'm making this overcomplicated.


HTT 228:208 = 1.10 divider and this will make it easier for me to OC?
 
nice work man! im pretty new to overclockin to but im hooked forever! lol...im very satisifed with the results..i found that settin a goal and reachin it results in great happiness!! i set my goal to fx-55 speeds (2600mhz) and now im at 2750mhz so im sittin nicely :) hope u reach ur goals too! good luck!
 
lcboyee1123 said:
nice work man! im pretty new to overclockin to but im hooked forever! lol...im very satisifed with the results..i found that settin a goal and reachin it results in great happiness!! i set my goal to fx-55 speeds (2600mhz) and now im at 2750mhz so im sittin nicely :) hope u reach ur goals too! good luck!
if i had better circulation in my case i could run mine at 2800 all day long, but a little bit after i strike up moh:aa and play for a while, it errors out on me, check my temps i'm up in the 50's, case temps high 30's... oh well, i'm getting a new case soon
 
Welcome to the first day of the rest of your life. Don't break it ;)
 
congratulations. Welcome to the world of overclocking...It will soon destroy ALL your free time...:p

But its good man, keep it up!
 
Back
Top