Gigabyte P965-DS3 Problem

c0x

n00b
Joined
Jan 16, 2006
Messages
32
Well just bought a new case, ram, and heatsink for my comp. Transferred everything over today and couldn't get my 2nd HD recognized. Couple things to know beforehand, my Primary HD is SATA, my secondary and disc drive are IDE. First boot everything going good, get into windows and realize my disc drive and 2nd HD aren't recognized.

I tried having only the HD hooked up, switching ide cables but couldn't get it recognized. At the moment im running with only my disc drive hooked up to ide and its being recognized fine.

This wouldnt be a huge problem but for the fact that I formatted before I transferred stuff over, and backed up all my files on that HD. Anyone have any clues to why its acting like this? I don't see how the HD could just plain not be working anymore, as was fine beforehand, and was pretty careful not to mess anything up in the transfer.
 
It's a long shot, but I once had a problem on a older computer a few years ago were a ide hardrive would suddenly disappear in windows for no apparent reason. Tried another ide cable same thing. I figured it must be a motherboard problem. But on a long shot found a third ide cable and that fixed it. So I had 2 bad ide cables before I found a good one. If you can scrounge up another ide cable try it one more time.

Other than that maybe the ide channel is crapping out in the motherboard. Sata hd's and optical drives a fairly cheap if you want to continue using the ds3 as as long as everything else is working on it correctly.
 
Make sure that your HD and optical drive have their Master and Slave status set correctly through the jumpers on the backs.
 
Back
Top