silverwolf0
Gawd
- Joined
- Jan 14, 2004
- Messages
- 613
I have three drives connected to a gigabyte h97n. First is ssd with win 7. The other is a 3tb toshiba brand new. Third is a samsung 2tb from a 5yr old pc. Neither hdd have boot partitions or os installed. When i connect the samsung, the boot process becomes very slow. The gigabyte logo flashes several times and my monitor disconnects several times. The starting windows logo takes a very long time. When i finally get to desktop, i check disk management. The samsung drive is not there. I unplug the samsung and restart and everything works fine, so it is the samsung drive. I've tried swapping sata ports and cables and power connectors around and still the same issue. However, when i place the samsung drive back in the old computer, it reads and works fine.
What could be the problem?
Also was wondering if there were any options in the bios to make the bios play nice with hdtv screens. My old pc with asus mobo the bios worked fine. The gigabyte using the same tv the bios shows up as a black screen with large cursor. Tried hdmi and dvi to hdmi from a 750 ti card. I have to pull out a small monitor to see the bios.
Edit4: spoke too soon. Has magically vanished again after restart.
Edit3: okay i just imported them and now the drive works in windows. Still says dynamic. I dunno how it ended up dynamic i never used raid before. I was able to access the bios but the drive still does not show up there and boot is still slow. Should i drag all the data onto the other hard drive and format it to a simple disk?
Edit2: it may have something to do with the thing being part of a winxp system. I only used it as a secondary drive for storage though. I did upgrade to win7 on the old machine, and had no problems seeing it. It doesnt explain the crazy boot restarts and inability to access bios though.
Edit: I tried it on one of the two side sata ports separate from the cluster of four. Boot is still slow but now in disk management it says disk 1 dynamic, foreign. There is no bar or size for it. There are options to import foreign disks and convert to basic disk. I'll hold off on doing anything as i dont want to screw up the data on it.
What could be the problem?
Also was wondering if there were any options in the bios to make the bios play nice with hdtv screens. My old pc with asus mobo the bios worked fine. The gigabyte using the same tv the bios shows up as a black screen with large cursor. Tried hdmi and dvi to hdmi from a 750 ti card. I have to pull out a small monitor to see the bios.
Edit4: spoke too soon. Has magically vanished again after restart.
Edit3: okay i just imported them and now the drive works in windows. Still says dynamic. I dunno how it ended up dynamic i never used raid before. I was able to access the bios but the drive still does not show up there and boot is still slow. Should i drag all the data onto the other hard drive and format it to a simple disk?
Edit2: it may have something to do with the thing being part of a winxp system. I only used it as a secondary drive for storage though. I did upgrade to win7 on the old machine, and had no problems seeing it. It doesnt explain the crazy boot restarts and inability to access bios though.
Edit: I tried it on one of the two side sata ports separate from the cluster of four. Boot is still slow but now in disk management it says disk 1 dynamic, foreign. There is no bar or size for it. There are options to import foreign disks and convert to basic disk. I'll hold off on doing anything as i dont want to screw up the data on it.
Last edited: