Gigabyte GA-EX58-UD4P Boot Sequence Loop

Joined
Aug 10, 2009
Messages
29
Hey guys, This is my first post here at [H], but I've been pretty busy over at OCN since I joined. I had an issue that I posted over there and after 5 pages I still can't get things to work correctly. I thought the change of scenery might bring some fresh opinions and ideas on the matter.

Here's the issue:

When I turn on my computer, it beeps once, the screen comes out of sleep and displays the Gigabyte logo for anywhere from 2-10 seconds (depending on what hardware I have plugged in). The screen then goes back into idle and restarts the process.

In my troubleshooting I have managed to figure out a few things. First of all, sometimes I can flash the BIOS to F8, the most recent update on Gigabyte's site. If I am able to do so, (most of the time) I am then able to get into the BIOS and then into Windows 7. Sometimes it asks for the Windows repair disk to be inserted so it can find the master boot record. After inserting the disk the system restarts then begins the endless loop again.

Point of that paragraph being that a freshly flashed BIOS will almost always let me into Windows. However, after restarting or turning off the computer, all the settings are lost.

This is what I've done to try to combat the issue:
Removed the board from the case and set it up on the anti-static foam pad. I've tried it with one stick of memory (all of which pass Memtest 86+) as well as two and three.
I've tried it with multiple graphics cards.
I've tried it with different cooling solutions and thermal compounds.
I've tried clearing the CMOS and BIOS every way that I know of including pressing the button in the I/O section of this board, removing the battery, replacing the battery, shorting the jumpers, and pretty much every combination of the afmormentioned.
I've tried with different HDD's as well as different PSU's.
I've also checked all the blocks to make sure they aren't grounding

Since you guys don't have the system feature (at least that I can find) like OCN, here's all my stuff. I've dropped way too much money into this system to put up with it malfunctioning like this.

  • Gigabyte GA-EX58-UD4P
  • Intel Core i7 920 (C0 :()
  • Diamond 4890 XOC
  • Sapphire Toxic 4890
  • 6GB OCZ Platinum 1600 MHz DDR3
  • Corsair 1000HX
  • HAF 932 (Painted it white!)

And my watercooling setup:
  • Enzotech Sapphire
  • Type-Z 1366 Mount
  • EK GA-EX58 NB/SB + Mosfet Water Blocks
  • EK 250mL Multioption Reservoir
  • Swiftech MCP655 Vario
  • Feser UV Blue Tubing
  • Swiftech MCR320 + 3 High Speed Yate Loons

All this as well as some eye candy and some other stuff.

I am going back to school in two weeks (the 21st) and want to have my system up and running. I've RMA'd this board twice already with Newegg. I really had to fight for the last one too. I've had bad luck but loved the board when it worked. If I have to RMA it, it will be through Gigabyte directly, though I would prefer to figure out the issue on my own.

This seems like a very specific problem that could easily be pinpointed, but no one seems to know quite what it is. I put a ticket in with Gigabyte a while ago but they still have not gotten back to me.

ANYWAYS. Sorry for the extremely long post. That's 5 pages and a week's worth of work in one post. All help is absolutely appreciated.
 
Give them a couple days, it takes them two or three to get back with even the simplest of questions.
 
Having 3 DOA's or malfuntioning mobos I think is nearly impossible. The only thing you haven't tried is the CPU itself. Did you do any OC'ing before this? When was the last time it worked properly
 
I've sent the processor off to Intel and the board to Gigabyte. I didn't have the equipment to determine which one it was so I explained the situation to them. They both took them.
 
It almost sounds like you've got a bad SATA cable on one of your drives, or are having some issues with the configuration of the hard drives or DVD player, perhaps a conflict between them, or incorrect settings of your access mode (IDE/AHCI/RAID). I know some DVD players have issues with AHCI or RAID modes (usually older drives).

That's just what it sounds like to me from your description.
 
I've sent the processor off to Intel and the board to Gigabyte. I didn't have the equipment to determine which one it was so I explained the situation to them. They both took them.

Well hopefully when you get them back, something works :( Sucks having problems that can't be solved.
 
When you get it all back together try a format and re-install of Windows. Might be as simple as the MBR getting hosed. You might try and make the hard drive the first boot device in the bios and see if that helps.
 
Back
Top