Gigabyte EX58-UD5 Help

Status
Not open for further replies.

nitrobass24

[H]ard|DCer of the Month - December 2009
2FA
Joined
Apr 7, 2006
Messages
10,477
I am wanting to OC my processor but I cannot seem to get it stable above stock clocks.

I thought that I would try to update the BIOS as there have been a few revisions since i got mine.
However, I cannot for the life of me figure out how to update the BIOS.

I downloaded the BIOS and it has a flash utility but I run it and it says that its not compatible with my OS cause its a 16-bit app.
I also tried to do it from the BIOS with a flash drive, but the utility does not see my flash drive as an available place to look for a BIOS. The only option is Floppy A: Which I dont have.

Do I really need to go buy a floppy drive?
Srsly there has to be a way to do this without a floppy.
 
The last time I used Qflash to update the bios on my P45 Gigabyte board, it went well. I just downloaded the corresponding bios, extracted to my flash drive, made sure I left open the option (in the bios) to boot from a device other than my cd/dvd drive or my hard drive, stuck the flash drive in my front usb port, rebooted, hit del and entered Q flash. I have to navigate down to the flash drive (believe it was seen as another hard drive) and selected it and hit enter.
This is all off the top of my head, but it should be pretty close to what you'll see and need to do.

Good luck
 
hmm thats what I thought too.

Maybe i will try a different flash drive. This one is a 64gb and is formatted NTFS.
Ill try a 1gb formatted FAT16 and see what happens
 
You have to format the flash drive with FAT/FAT32. Then use QFlash in DOS and all should be fine.
 
Ok yep it was a formatting issue.

Thanks for steering me the right way.
 
Status
Not open for further replies.
Back
Top