Gigabyte 990XFA UD3 memory issue

Kaos_Drem

Gawd
Joined
Oct 16, 2004
Messages
970
I have a problem that I haven't run across in a few years. I run a bulldozer 8120 in this board and no matter how little or how much memory I run in the board it always has half of it hardware reserved. I have tried reseating the memory and reseating the processor making sure it has no bent pins as well.

Any help or tips on this would be greatly appreciated.
 
I once had a mobo that did the same thing. It read all the ram and gave correct ram readings but reserved 50% of memory. Looked at the mobo closely and saw 1 capacitor disconnected it self from + side onto the mobo.

Re soldered it and it worked great non-reserved.

Just an idea?
 
Back
Top