Giabyte 965P DS3 REV 2.0

3bqruk

n00b
Joined
Nov 19, 2005
Messages
16
Just got this board from new egg today after using a Biostar 965PT that was not a great overclocker at all (377 FSB max),now I'm currently 2hrs. stable (3081 ghz)with Orthos.I'm such a happy camper now.I think I might try for more after another 20+ hrs of no errors. ;) ;) ;) ;)
 
I have a artic freezer pro 7 plus 2 exhaust fans and 1 120m intake fan on the side.
Oooh, I also have a small fan pointing at the north bridge. Good luck to you,Hope you get Rev 2.0. :p :p
 
My DS3 and e6300 is doing 7x430mhz just fine. 3ghz 1.35v 10 hours orthos stable :) Great mobo
 
cooldude918, I have the same setup as you do except for HSF and video card. What bios voltage setting did u used to get to 430? Mine doesnt boot up all the way on 450 but its perfectly fine and stable at 425. Also what is your temp at ilde and load?
 
yujie said:
cooldude918, I have the same setup as you do except for HSF and video card. What bios voltage setting did u used to get to 430? Mine doesnt boot up all the way on 450 but its perfectly fine and stable at 425. Also what is your temp at ilde and load?
vcore set at 1.35, vdimm is +.1 or .2, and the rest of the voltages are +.1(not at home so dont remember them all), the fsb or whatever else ones. Timings are set at 5-5-5-15 and rest on auto(though im going to specify them later once i find all the correct timings). Idle temp with fan at 70% is around ~45c with orthos load around ~55-56C. I can lower the temps by raising the fan if i need to, but it gets much louder at 100%, so i feel my temps are fine so i just leave it at 70% and its much more quiet.
 
Back
Top