• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Ghost Raid 0 Image to single drive

M

mainomega

Weaksauce
Joined
Apr 1, 2006
Messages
65
Hello,
I made an image of the OS and all the goodies from my Raid0 array. My question is : will i have a problem ghosting this in to the same setup but minus the raid0 array ?
 
As long as you boot from the Ghost Floppy - shouldn't be a problem.

I'm assuming that you Ghosted the Array in Windows with one of the newer versions of Ghost.
Because the Ghost Boot Floppy wouldn't have the Array Controller Drivers on it.

Just create a Ghost boot floppy and make sure that the drives that you want to ghost the image to/from can be seen by Ghost.
Ghost will recognize USB drives and any drives that you can see directly in your BIOS setup. That means that they can't be on a non-chipset controller.

Shouldn't be a problem.

Luck
 
You must log in or register to reply here.
Back
Top