Forsaken_Saint
Limp Gawd
- Joined
- Dec 4, 2001
- Messages
- 231
We are attempting to reimage a machine at my job. We are running Ghost 7.5 Multicast server on our laptop which is connected to the Receiver PC through a switch. We run a hotwire into the switch so they can get IP addresses from our DHCP and then unplug the hotwire just before transfer of image to decrease Bandwidth congestion.
This normally works but lately on the last 3 machines I have tried I come up with the following error "Check that Ghostcast server is ready to accept clients" it of course is.
I have switched Laptop servers, reinstalled ghost, created new bootdisks, changed switches cables, even the target PC.
What am i missing?
Cliffs-
1. Ghost no worky
2. Changed out every piece of equip and software involved
3. Pulling hair and teeth out.
This normally works but lately on the last 3 machines I have tried I come up with the following error "Check that Ghostcast server is ready to accept clients" it of course is.
I have switched Laptop servers, reinstalled ghost, created new bootdisks, changed switches cables, even the target PC.
What am i missing?
Cliffs-
1. Ghost no worky
2. Changed out every piece of equip and software involved
3. Pulling hair and teeth out.