maxpower1119
Limp Gawd
- Joined
- Jun 4, 2004
- Messages
- 151
I recently moved 4 hard drives (varying sizes between 80 -300 gigs) to and old P2 running Windows XP. I have the drives connected to an Adaptec PCI to IDE controller. Occasionally when copying files from one computer to this one. I get a series of errors.
"An error was detected on device \Device\Harddisk2\D during a paging operation."
"The system failed to flush data to the transaction log. Corruption may occur."
"The driver detected a controller error on \Device\Harddisk1\D."
"{Delayed Write Failed} Windows was unable to save all the data for the file . The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere."
This seems to happen with all of the drives, randomly.Eventually explorer crashes. I tried updating the drivers for the card which worked ok, but I couldn't update the bios for it. When I do a Scandisk and chkdsk, both come back fine, and there are no errors in the event viewer. Any advice would be appreciated.
"An error was detected on device \Device\Harddisk2\D during a paging operation."
"The system failed to flush data to the transaction log. Corruption may occur."
"The driver detected a controller error on \Device\Harddisk1\D."
"{Delayed Write Failed} Windows was unable to save all the data for the file . The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere."
This seems to happen with all of the drives, randomly.Eventually explorer crashes. I tried updating the drivers for the card which worked ok, but I couldn't update the bios for it. When I do a Scandisk and chkdsk, both come back fine, and there are no errors in the event viewer. Any advice would be appreciated.