• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Getting error in Prime95

E

EtherealConstruct

Limp Gawd
Joined
Jan 4, 2009
Messages
216
When I run blend, almost immediately after I click begin, one of the workers says "Cannot initialize FFT Code, errcode= 1005" The worker that gets this message changes every time. What's wrong?:confused: Run on a 1090T, M4A89GTD PRO (Stock settings, no overclock), and 4gb Corsair XMS3 1600MHZ (which is set to 1333 mhz by default in the bios).
Thanks!
 
Make sure that the CPU has enough voltage going to it.

And double check Prime85's results with another app like OCCT, IBT, or LinX.
 
hm... google it further. you may need a hotfix or something like that... or you may need to rma the cpu.
 
EtherealConstruct said:
When I run blend, almost immediately after I click begin, one of the workers says "Cannot initialize FFT Code, errcode= 1005" The worker that gets this message changes every time. What's wrong?:confused: Run on a 1090T, M4A89GTD PRO (Stock settings, no overclock), and 4gb Corsair XMS3 1600MHZ (which is set to 1333 mhz by default in the bios).
Thanks!
Click to expand...

Hi just wanted to bump is there was a fix for this, I've run so many programs OCCT, LinX, Small FFT, Large FFT and all pass for 12+ hours.

When testing a custom (blend settings with more RAM usage typed in) P95 run or blend run I get a worker stopped with the 1005 error message above (usually always around the 8 - 9 hour mark), the worker stops but doesnt report an error as a result of testing.

So is this a page file setting error? Does p95 run out of ram or something? Didnt get any definite answers on google and not sure if it was enteriely solved on this thread.
 
What's the purpose of running programs like Prime95? Just for stress testing a system?
 
Thats all I use it for, I believe it has other purposes. Anyone have any insight on the error?
 
ditchmagnet said:
Does it occur in both 64bit and 32bit version of P95?
Click to expand...

I don't think there are two versions with the one that I have. Maybe that is the problem? I just have a version with a p95.exe

I'm thinking it is a problem with p95 itself since I ran OCCT last night and it was fine thins morning.
 
You must log in or register to reply here.
Back
Top