Getting BSOD's like a champ. Assistance?

Asacolips

Limp Gawd
Joined
Dec 4, 2008
Messages
272
I recently begun getting a ton of BSOD's, to the point where I'm not willing to do work on my pc for fear of losing it in a crash. Anyways, my rig is in my sig, and I'm running Windows 7 64-bit. These BSOD's started yesterday, after a friend had been on here. In his case, he was browsing the web on my pc, going to download the drivers for the rig I had just built for him. The websites weren't responding (in any browser) and then it gave a blue screen. I believe he said it was a harddisk speed error or something, but I haven't actually checked that dump file, as I'm currently on Ubuntu 10.10 uploading them.

Anyways, off and on today I've been getting blue screens, none of which have been the same twice. I've gotten IRQL errors, PFN List errors, System Service Exceptions, and a few others I can't remember. Again, all of the errors are packed away in a dump collection that I haven't yet been able to read (due to Ubuntu) at the end of this post.

Does anyone have any ideas what I can do to help narrow down the problem? I downloaded WD's hard disk utility and it reported no errors on the quick test, though I haven't ran the long test yet. I ran memtest86+ from my Grub menu for probably about 15-30 minutes yesterday and it reported no errors, but I've heard that isn't long enough, so I'll run that overnight. I ran Prime95 for about an hour to see if it's related to my cpu, but there's yet to be any errors there. I also ran FurMark for about 20 minutes with no issues, so I don't believe it's the video card either.

I guess one other idea for what might be a cause is that I did a Startup Repair based System Restore yesterday. My machine wouldn't even boot up properly after that initial blue screen, so I ran Startup Repair and then System Restored it back to a working state. Perhaps during that process some crucial Windows file got corrupted. Does that even sound feasible?

Any assistance in helping me interpret these dump files and diagnosing this problem will be much appreciated. I have a very limited replacement part budget, and would like to pin this down before committing cash to any hardware replacements.

I also appreciate anyone who actually read that wall of text. Thanks again.

bsod-dumps.zip
 
Well first off, you didn't run the tests nearly long enough. Also, read the sticky that Enginurd so generously posted as a sticky on this forum. It has some helpful tips and steps that you should do, and most of them I will be repeating in this response:

http://hardforum.com/showthread.php?t=1349426

1. For hard drive testing, I recommend running the bootable ISO Drive Fitness Test from Hitachi. Run an advanced scan. Bad sectors on your hard drive could have caused Windows files to be damaged, or other files.

2. You did not run MemTest long enough. You should run that for about 8 hours. 15-30 minutes it's definitely not enough. It runs 8 different versions of memory tests, You should let it give you at least 10 passes of each series of 8 tests.

3. Prime95 is a good utility to test the CPU, but for maximum stress and to make sure it's not an overheating problem, IntelBurn Test is a good utility to use, but make sure you monitor your temperatures while doing so.

IMO, you should fully test your hard drive a little bit more, also open your computer case and inspect the capacitors on your mainboard, if they are bulging or oozing at all, you need to replace it.

Good luck!
 
I betting memory/motherboard issue. Do a memtest overnight. A cpu test couldn't hurt either. Also if you are oc'ed go back to stock and do the tests. If those don't find anything try all the test you already tried but for much longer times.
 
Yeah, I had figured that wasn't long enough for any of the tests. I'm devoting days to them as I go. With that in mind, I let memtest86+ run for 8 and a half hours overnight, and it got no errors throughout 11 passes. Looks like the ram is probably fine.

On another note, during that first blue screen which had the most issues, I had to use the jumpers to reset the cmos, so I'm entirely at stock settings. I'll the harddrive utility you mentioned soon.

That said, I may have inadvertently found the problem. During one of my reboots, Windows decided it would be a good idea for it to run checkdsk. During that, I noticed it found several errors and then corrected them. I'm thinking at the moment that my harddrive was mostly badly organized, so to speak. I'm going to run a defrag in a moment, and then move on to other tests.
 
Run Drive Fitness Test first. Here is a PDF for error code list on DFT to show you your results.
 
I'm having issues getting Harddrive Fitness Test to work. The obvious barrier is that I don't have a floppy drive, and can't take the bootable diskette route. Aside from that, my motherboard's bios has decided to stop recognizing my dvd drive for the purpose of boot order (something it's never done before) so I've yet to be able to use it as a bootable cd either. Is there a way to make a bootable jump drive out of it?

In the mean time while I'm at class, I'll run WD's long test which should hopefully find bad sectors. At least, until I can find a way to get HFT working.
 
You'll need a fresh flash drive, and your mainboard will need to support booting from a USB device. A bootable CD is your best bet, I burn them with CDBurnerXP.

If you're having problems choosing a boot device, I would recommend flashing your BIOS to a current version.
 
I've still yet to have any luck booting the Drive Fitness Test, but I was able to boot my Windows 7 x64 cd. At any rate it crashed during or after my WD Extended Test yesterday, so I backed up important data and reformatted/reinstalled Windows. So far, there doesn't seem to be any problems as the system ran the WD Extended Test throughout last night and detected no bad sectors on the hard drive. In addition, random web browsing hasn't crashed my system, as it did before.

I'm thinking that my previous Windows installation was corrupt in some manner, but I'm not sure how or why. So I'm still going to attempt to get Drive Fitness test working, along with running other stress test programs.
 
Sounds good, glad you got it working.

I think Drive Fitness Test may have some problems with certain Intel chipset motherboards. Hope that isn't the case with yours.
 
Drive Fitness test probably doesn't work with my motherboard, as I've had numerous problems in the past getting Ubuntu or its disk to boot. At any rate, WD did report that all the sectors were fine, but the reformat apparently didn't solve it. Got another BSOD as I went to redownload Prime95.

Since the ram and harddrive are mostly ruled out, I'm thinking it's the motherboard. Which would also seemingly jive with it, since my bios isn't recognizing my dvd drive anymore, along with some other motherboard related issues.
 
My computer BSOD's and then I start it up to disk read error's.

Is that bad?
 
Drive Fitness test probably doesn't work with my motherboard, as I've had numerous problems in the past getting Ubuntu or its disk to boot. At any rate, WD did report that all the sectors were fine, but the reformat apparently didn't solve it. Got another BSOD as I went to redownload Prime95.

Since the ram and harddrive are mostly ruled out, I'm thinking it's the motherboard. Which would also seemingly jive with it, since my bios isn't recognizing my dvd drive anymore, along with some other motherboard related issues.

Ouch, that sucks.

Did you visually inspect the motherboard?

You will be looking for bulging, leaking or popped capacitors:

http://rodrigo.sharpcube.com/wp-content/uploads/2010/04/blown_up.jpg

Also, you may want to reseat all your core components.

12V ATX Connector, RAM, Hard Drives, ROM drives and video cards. Slot/Heat/Chip Creep can cause random problems as well. Just trying to rule out a bad mobo :(

EDIT: HardForum didn't like my link.
 
I did look it over, minus the parts that were obscured by view such as the area underneath my cpu cooler, but I didn't notice any messed up capacitors. At any rate, I can use my wife's pc for stable work for the time being. I've ordered a new motherboard, so that should also help single out whether or not it's the problem. I've been wanting a new motherboard anyways, since this one was more or less a freebie from a friend's build that didn't end up as planned.

Anyways, we'll see how it plays out in a few days. If I'm lucky, the motherboard will solve the issues. If not, I'll need to move my wife's graphics card over to rule out the video card, though I doubt it would cause errors this serious and constant. I suppose it is still possible that it's the hard drive and that WD just isn't detecting it well enough, at which point I'll have to send that in for an rma, I suppose.
 
Back
Top