getting an old working mobo to work again

wayne

2[H]4U
Joined
Aug 4, 2003
Messages
2,726
hey i have a motherboard that i tested out to be fine 2 months ago... then today i took it out again to test it

it is a socket 370, contains 2 ISA slots, 4 PCI slots, 1 AGP slot, and 1 CNR slot... pcb color is brown.... i dont know the exact motherboard company/make but the chipset is as follows
Northbridge: VIA VT82C693A
Southbridge: VIA VT82C686A

now, the problem is, it would not show up on the monitor.. ive tested it with two working monitors and it all came up as no signal.... ive tested it with an AGP Radeon 7000, AGP SiS 315MX, and a crappy PCI video card that worked on this motherboard with one of the monitors tested with... it simply does not show anything on the screen

i have swapped it with a new CMOS battery... all this had worked before and now when i tested it again, it seems like its totally dead but i think the chances of that is pretty low

im not sure about the other information and i do not know anything thing else thats specific however if i still need to check something, feel free to ask

please help, thanks! :)
 
check to see if the capacitors are leaking, this happened real bad to my slot A abit board.
 
Check the jumpers, reset CMOS. Plug in the PC Speaker and let us know if and what beeps you get.
 
how exactly do i know if the capacitors are leaking?

yea, i plugged in a speaker... no sounds... thinking it might be backwards, i reversed the leads... still no sounds... its either a non-working speaker or the motherboard isnt putting out any signals.. i dont have a manual with this motherboard but the front panel pins, it just happens that the speaker pins are labeled spkr so i know... as of now, i dont know what to do about the speakers problem... if it works, im sure i could figure it out with the beep codes... but at this time, it doesnt seem to work... i have other speakers tho but the wires fell off so i may havta solder them back on to test with it
 
Back
Top