• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

General SATA Questions

Joined
Oct 5, 2004
Messages
1
Hello. I am quite a serial ATA neophyte, but my questions are as follows:

My system is based on the ASUS K8V SE Deluxe motherboard which features two integrated RAID controllers (one VIA, one Promise). I've already got one WD Raptor 36.7GB hard drive, and I'm planning to buy another complement very soon in order to establish a RAID 0 array; however, I am interested in buying another hard drive (likely 7200RPM, ~200GB) in addition to that exclusively for file storage. Would I be able to put another serial ATA drive on the controller not taken by the future RAID 0 array (i.e., if I had two Raptors on the VIA controller, would I be able to operate another non-RAID drive on the Promise controller), or would I have to settle for and IDE drive that is independent from the RAID array. Or, alternatively, should I forego the serial ATA for an IDE drive altogether?

Secondly, for anyone who has experience with this board: does one controller provide better performance over the other? If so, which one?

Thanks for taking the time to read. I hope someone out there can help!
 
if there are 2 sata raid chips, I would certainly think you could have 2 serperate raids
 
Back
Top