FSB & processor speed settings on Mobo

sailor

Limp Gawd
Joined
Jun 1, 2002
Messages
158
I have an old Luckytech P694A mobo and I want to use it to build a system. I have the disk and manual that came with it. I also have several questions and I would appreciate specific answers to my questions as well as general advice. The idea is to build a system with parts I already have or which I could get for little or no cost.

1- The manual says it supports (1) SDRAM as well as PC100/133 and (2) DRAM ECC or parity. I am assuming I will have to match the speed of the memory to the speed of the FSB. Right?

2- It says it supports Intel PII, PIII and Celeron but it does not especifically say up to what speeds. I am assuming the max speed is given by the FSB speed times the multiplier ratio. Right?

3- FSB. This is what has me most confused. The manual shows three options which can be selected with jumpers. The options are
(1) Auto detect,
(2) 66 overclock 100 and
(3) 100 overclock 133.
I have no idea how to interpret this. I am assuming (1) means the board detects the FSB speed from the processor but what do 2 and 3 mean? I think there may be an option to set the FSB speed in the BIOS. I need to understand the issues raised by the three previous questions as they are all lnked and I am confused.

4- The multiplier can be selected between 2 and 8 so, if I have the FSB at 133 this means I can have the processor running up to 1000 Mhz. Right?

5- The AGP slot is 4X and I have an AGP board which is 2X. I assume I can use this board and the mobo AGP will sloww down to 2X. Correct?

I have pretty much everything I need except processor and RAM. This means I will be looking for cheap / free processor and RAM. Supposing I can choose, what would be the best choice?

Thanks.
 
you are kidding right :eek:This is an overclocking forum. try customer support for motherboard maker. google is your friend! I have to go there WHY WOULD YOU WASTE MONEY ON THAT?
 
purefun65,

This is not an overclocking forum, this is the motherboards forum of [H]ard:OCP. Most of us here are into this as a hobby and overclocking falls under that, yes. But just tinkering around and doing stuff for the hell of it falls under the hobby label as well. Being helpful around here is appreciated no matter what the questions are.

I myself still have a via apollo pro box still running after a number of years and it is one of the most stable systems I've ever helped set up. Still has some juice left as a basic office/surfing type machine.

sailor,

1. I would just get pc133 ram. It will run at either pc100 or pc133 speeds. If you bought the pc100 it would be iffy that it could run well at pc133 (which is what you want with this board). I would be that, yes, the ram will run at the fsb speed that you set up.

2. You will want to use the socket 370 for the processor as those procs will be newer than the slot 1's. I of course can't garauntee this, but I'm pretty sure that whatever socket 370 proc you use should be fine unless for whatever reason the board has some initial bios release that won't work. The p3's are cheap though, I would imagine that whatever you put in will work just fine. Yes, the proc speed is a combination of fsb and multiplier.

3. I personally would try auto detect first and if it defaults to a lower speed that the proc is rated at try the other two settings. If it isn't readily apparent what everything is running at, set up windows and use cpu z or some such utility to check.

4. Sounds right. I know that there are socket 370 p3s that run up to 1.4. I'm not sure if you are going to be stuck with those mulitpliers or not.

5. It should default to the lower agp speed. To be safe I would see if there is a bios or jumper setting to lock it in at 2x.

purefun65 was correct that google is your friend though. Give it a try with different search options and see what you can find. There doesn't seem to be a lot of info out there about your board though.
 
KJ43, thanks for your input. I have a bunch of components lying around and I thought I'd put together a box to give as a starter system to someone who can't afford to buy one. That way I get rid of some junk, help someone out and get to tinker and learn.

I have searched Google extensively but Luckytech was short lived and I did not find any useful information.

My main question, even if only out of curiosity, is the meaning of the FSB options
(1) Auto detect,
(2) 66 overclock 100 and
(3) 100 overclock 133.
I do not understand them and I thought they would be general options to many boards and not board specific. I was hoping someone could explain to me what the mean as boards tend to be similar in how these things are configured. Also, it seems the FSB speed can be configured from the BIOS so I am not sure if the BIOS has precedence over the jumpers or what. Again, I did not have much hope that anyone would know this board specifically but rather that someone could give me some general advice on how these things work on most boards.

Again, the objective is not only to assemble a working system but also learning a bit in the process.
 
that rig belongs by the curb! they have announced the end of the athlon xp and you are posting about some rig that is oooh soo old and you criticize me for telling this person that he is wasting money on a rig that has been dead for years. Wheres the irony in that lol :p
 
Actually, there's no irony at all.

How about some help for someone asking for it instead of criticism? How is learning and tinkering with something even if it's older wasting money? And how is a rig dead if it can still be productive?

sailor isn't expecting that this will be some "uber" rig. How about actually reading his posts and *getting* what he said instead of criticizing him for something that isn't cool enought for you.

This forum used to be more about helping people out with problems, not making judgements about what they are doing.
 
Back
Top