![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
FS/T: Pentium-M 1.8GHz Dothan core, Single Board Computers, more - Need cash/parts!!
1.8GHz Pentium-M 745. Dothan, SL7EN, 2MB cache, OEM chip. Never overclocked.
$145 shipped
SBC #1 and #2 are Advantech PCM-5820 boards. 233Mhz Geode low power CPUs, Cyrix 5530(Media GX) chipset with built-in video and sound. Built-in Realtek 10/100 ethernet. 2 serial, one parallel, one IDE(two devices), onboard Compact Flash(bootable), and a PC/104 interface. These also have an onboard LCD interface, I've run a 12" LCD directly from one of these. Best part, these are tiny. Smaller than a 3.5" hard drive. Just under 4"x6", can be made to fit anywhere a 3.5" hard drive fits. Very low power, uses about 15 watts with hard drive and a CD drive(laptop parts). Can run off of 5 volt only, too. Power hookup is a standard molex. Both will come with cable kits and a 64MB SODIMM for memory. Driver support is out there for pretty much everything, although XP support is very poor. They work great under 98, NT4, 2k, and even Linux.
$80 each shipped, these go for $300+ new. Price not negotiable, I'll just keep them for other projects.
SBC#3 is an Arbor EmETX-i702]. This is an ETX form factor System-On-Module. Supports 400MHz FSB Pentium-M and Celeron-Ms from 1.3GHz to 2.0GHz. Fulls specs at the link. Bare board only, no manuals, cables, or carrier board. The one I have is slightly different than at the link, it doesn't have the ISA bridge on board. Sort of a "legacy-free" setup. Board was well over $500 new, has served its purpose and been replace with a custom board so I'm trying to recoup what I can. This is for the advanced tinkerer, it needs a carrier board and custom heatsink to be of much use. Carrier boards(normal ATX and 5.25" EBX) run around $120 but can be found used.
$75 shipped, bundle with the P-M for $200
Some other stuff:
Tyan Tomcat i815t - bareboard, dual 10/100 but one is flakey - $30 shipped
Dlink 802.11b access point - $20 shipped
2x340MB IBM microdrives - $30 each, $50 for the pair
IDE 100MB Zip drive - $15 shipped
Maze4 copper-top for P4, 3/8" barbs - $30 shipped
Maze1C for S370/462, 3/8" barbs - $20 shipped
5.25" acrylic res, 3/8" barbs - 15 shipped
Diamond Stealth PCI - older S3 card, $5 + shipping
Rendition Verite PCI - $5 + shipping
256MB stick of registered DDR266, Infineon CL2 - $25 shipped
EDO DIMMs, 64MB and 128MB - $20 shipped for both
Looking for:
Pentium-M 479 motherboards, would LOVE a DFI i855GME
SMALL Compact flash cards, 16MB or smaller - Just bought 25 32MB cards for $66, so they have to be cheap
El Cheapo stick of DDR, 256MB of DDR266 is okeydokey but more and faster is better
128MB or 256MB PC133 SODIMMs, prefer 256MB but 128MB will work
shipping included for US only
reduced prices for multiple purchases
all items guaranteed alive on arrival, but otherwise sold as is
PayPal preferred
heatware and Ebay under widefault
e-mail is [email protected]
1.8GHz Pentium-M 745. Dothan, SL7EN, 2MB cache, OEM chip. Never overclocked.
$145 shipped
SBC #1 and #2 are Advantech PCM-5820 boards. 233Mhz Geode low power CPUs, Cyrix 5530(Media GX) chipset with built-in video and sound. Built-in Realtek 10/100 ethernet. 2 serial, one parallel, one IDE(two devices), onboard Compact Flash(bootable), and a PC/104 interface. These also have an onboard LCD interface, I've run a 12" LCD directly from one of these. Best part, these are tiny. Smaller than a 3.5" hard drive. Just under 4"x6", can be made to fit anywhere a 3.5" hard drive fits. Very low power, uses about 15 watts with hard drive and a CD drive(laptop parts). Can run off of 5 volt only, too. Power hookup is a standard molex. Both will come with cable kits and a 64MB SODIMM for memory. Driver support is out there for pretty much everything, although XP support is very poor. They work great under 98, NT4, 2k, and even Linux.
$80 each shipped, these go for $300+ new. Price not negotiable, I'll just keep them for other projects.
SBC#3 is an Arbor EmETX-i702]. This is an ETX form factor System-On-Module. Supports 400MHz FSB Pentium-M and Celeron-Ms from 1.3GHz to 2.0GHz. Fulls specs at the link. Bare board only, no manuals, cables, or carrier board. The one I have is slightly different than at the link, it doesn't have the ISA bridge on board. Sort of a "legacy-free" setup. Board was well over $500 new, has served its purpose and been replace with a custom board so I'm trying to recoup what I can. This is for the advanced tinkerer, it needs a carrier board and custom heatsink to be of much use. Carrier boards(normal ATX and 5.25" EBX) run around $120 but can be found used.
$75 shipped, bundle with the P-M for $200
Some other stuff:
Tyan Tomcat i815t - bareboard, dual 10/100 but one is flakey - $30 shipped
Dlink 802.11b access point - $20 shipped
2x340MB IBM microdrives - $30 each, $50 for the pair
IDE 100MB Zip drive - $15 shipped
Maze4 copper-top for P4, 3/8" barbs - $30 shipped
Maze1C for S370/462, 3/8" barbs - $20 shipped
5.25" acrylic res, 3/8" barbs - 15 shipped
Diamond Stealth PCI - older S3 card, $5 + shipping
Rendition Verite PCI - $5 + shipping
256MB stick of registered DDR266, Infineon CL2 - $25 shipped
EDO DIMMs, 64MB and 128MB - $20 shipped for both
Looking for:
Pentium-M 479 motherboards, would LOVE a DFI i855GME
SMALL Compact flash cards, 16MB or smaller - Just bought 25 32MB cards for $66, so they have to be cheap
El Cheapo stick of DDR, 256MB of DDR266 is okeydokey but more and faster is better
128MB or 256MB PC133 SODIMMs, prefer 256MB but 128MB will work
shipping included for US only
reduced prices for multiple purchases
all items guaranteed alive on arrival, but otherwise sold as is
PayPal preferred
heatware and Ebay under widefault
e-mail is [email protected]