- Joined
- Aug 7, 2005
- Messages
- 243
Hey, guys - I decided to retire my hackintosh and get the real thing. The bios stopped saving my CMOS settings a few months ago. To run a hackintosh system you have to boot into AHCI mode, and every time I reboot it goes back to default setting so I have to go into BIOS, reset it to AHCI, and hit F10. I think the CMOS battery probably needs to be replaced, but not sure if that could be something else. (EDIT: I replaced the CMOS battery and it seems to be retaining the CMOS settings after rebooting just fine now.) The Corsair memory was recently replaced via RMA because my machine kept freezing/abruptly rebooting and I traced it back to one of the 4 sticks being bad. Corsair replaced all 4 of them to ensure they remain a matched set and it's been working fine since. Otherwise haven't had any issues with it. I'd rather not have to part it out since the individual parts aren't worth that much. Asking $200 plus actual shipping costs or pickup in Boston/Providence areas.
Antec Sonata III 500 mid-tower case
500W Antec Earthwatts PSU
120 mm rear fan replaced with a Cougar CF-V12H fan
Intel Q9450 2.66ghz 12mb stock HSF
Gigabyte GA-EP45-UD3R LGA 775 Intel P45 ATX motherboard
Corsair XMS2 8GB (4 x 2GB) 240-pin DDR2 800 (PC2 6400) SDRAM (TWIN2X4096-6400C5)
Powercolor 5770 1gb GDDR5
Plextor PX-716 16X DVD±R DVD Burner
Samsung 3.5" floppy drive
Rosewill RCR-IC001 40-in-1 flash card reader
ASUS USB-BT21 mini Bluetooth v2.0 + EDR dongle
Antec Sonata III 500 mid-tower case
500W Antec Earthwatts PSU
120 mm rear fan replaced with a Cougar CF-V12H fan
Intel Q9450 2.66ghz 12mb stock HSF
Gigabyte GA-EP45-UD3R LGA 775 Intel P45 ATX motherboard
Corsair XMS2 8GB (4 x 2GB) 240-pin DDR2 800 (PC2 6400) SDRAM (TWIN2X4096-6400C5)
Powercolor 5770 1gb GDDR5
Plextor PX-716 16X DVD±R DVD Burner
Samsung 3.5" floppy drive
Rosewill RCR-IC001 40-in-1 flash card reader
ASUS USB-BT21 mini Bluetooth v2.0 + EDR dongle
Last edited: